Hi ReWard,
das ist die Fehlermeldung von der Box - wird hier nur wiedergegeben.
Neustart hilft - dann wieder mehr Saft vorhanden. Du kannst auch e2 beenden bevor du viele Bootargs schreiben möchtest...
"Every Setback is a Set Up for a Comeback"
Thanks - the problem is known - we are currently working on it...Atemio AM 7500 HDMU 10790
keine Bootargs
-----====== HDMU 10790 enigma2 Git 5400 ======-----
BusyBox v1.21.0 (2013-03-23 04:52:13 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
AT7500:~# cd /tmp/SH4_MORLY
AT7500:/tmp/SH4_MORLY# ./fw_printenv
Can't open /dev/mtd6: No such device
"Every Setback is a Set Up for a Comeback"
sure your bootarg environment is OK?AMIKO ALIEN 2 + (HDMU 10797)
The bootargs environment variables are not read ... in the shell returns only the label definition!
P.S. This afternoon ... i can try with telnet command !
Ciao ...Code:host135 login: root Password: ('-. .-. _ .-') _ _ .-') ( OO ) /( ( OO) )( '.( OO )_ ,--. ,--. \ .'_ ,--. ,--.),--. ,--. | | | | ,`'--..._)| `.' | | | | | | .| | | | \ '| | | | | .-') | | | | ' || |'.'| | | |_|( OO ) | .-. | | | / :| | | | | | | `-' / | | | | | '--' /| | | |(' '-'(_.-' `--' `--' `-------' `--' `--' `-----' -----====== HDMU 10797 enigma2 Git 5400 ======----- BusyBox v1.21.0 (2013-03-28 16:46:31 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. host135:~# cd /tmp/SH4_MORLY host135:/tmp/SH4_MORLY# ./fw_printenv Warning: Bad CRC, using default environment bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm bootdelay=5 baudrate=115200 host135:/tmp/SH4_MORLY#
there seems to be a problem: Bad CRC, ...
could you check it again?
"Every Setback is a Set Up for a Comeback"
hello
can be formatted to create partitions and full backup with sh4 stb admintool
thank you in advance
yes - you can create your partitions,
go to the HDD/Images - Tab and switch to "Manage Partitions" - there you'll find everything you need
regarding full backup: currently not...
"Every Setback is a Set Up for a Comeback"
Manage partitions - there you first have to choose the device (flashdrive, hdd, ...) choose your device
Then you can change the number of partitions - or just use the pre-defined partition table,
double klick on the entries (e.g. filesystem, label, ...) and the changes get indicated properly.
If you are happy with your new layout just press the apply button (green tick) and the tool will do the rest for you...
"Every Setback is a Set Up for a Comeback"
maybe you understand German better than you can write it - in this case please visit the FAQ's (tbf in my signature) - there santa described everything very well...
"Every Setback is a Set Up for a Comeback"
hi morly,
bei AV700/7000/7500 und baugleichen kannst das knicken. die haben noch nie bootargs im flash abgelegt und nutzen ausschließlich embedded.
lediglich beim 7500 und baugleichen kann man die embedded bootargs durch einen "saveenv" in der uboot konsole ins flash kopieren und CRCgültig machen.
die im flash befindlichen bootargs haben ab dem zeitpunkt dann vorrang vor den embedded args
@morly
Amiko Alien 2+ ... Enigma2 bootargs is OK ...
I think that your fw_env.config (Spark7162.tool) u.boot linked not good with this type of receiver !Code:Starting kernel console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=6000 nwhwconf=device:eth0,hwaddr:30:00:0A:00:xx:xx Manufacture=Spark-Project STB_ID=0C:00:0A:00:00:xx:xx - 0x00000000 - 0 ...
considers that ... / dev/mtd0 ... is empty (FF) and u-boot not linked!Code:# Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundand # environment sector is assumed present. # MTD device name Device offset Env. size Flash sector size /dev/mtd0 0x00060000 0x00020000 0x20000
only if start i2s.ko module ... u-boot is linked to /dev/mdt7Code:host135:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "uboot" mtd1: 00a00000 00020000 "Spark kernel" mtd2: 00700000 00020000 "Reserve0" mtd3: 00200000 00020000 "Reserve1" mtd4: 16c00000 00020000 "Spark Userfs" mtd5: 00800000 00020000 "E2 kernel" mtd6: 07700000 00020000 "E2 Userfs"
Let me know if you want to other test ... or correct offset that I should try, because fw_printenv display the bootargs environment!Code:host135:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "uboot" mtd1: 00a00000 00020000 "Spark kernel" mtd2: 00700000 00020000 "Reserve0" mtd3: 00200000 00020000 "Reserve1" mtd4: 16c00000 00020000 "Spark Userfs" mtd5: 00800000 00020000 "E2 kernel" mtd6: 07700000 00020000 "E2 Userfs" mtd7: 00100000 00010000 "uboot"
Ciao ...