morly, so wie ich das sehe ist das der Prompt:
/ #
morly, so wie ich das sehe ist das der Prompt:
/ #
GB Quad 4K + GB Quad + Octagon SF4008 + Formuler F1
Geändert von morly (20.04.2013 um 14:04 Uhr)
"Every Setback is a Set Up for a Comeback"
Bitte zwischen / und # ein leerzeichen, sonst funktionierts warscheinlich nicht.
GB Quad 4K + GB Quad + Octagon SF4008 + Formuler F1
Das Wars!!! Kann mich jetzt mit der Box verbinden! Denke ich werde heute Abend weiter schauen.
Aktuell bin ich mit der Box Verbunden, Fehlende Tools wurden auf die Box kopiert und "supported file system changed". Ansonsten ist alles grau hinterlegt im Tool.... Lese mich jetzt mal weiter durch Forum wie es jetzt geht!
Vielen Dank an Euch!
Hi,
musste das UN/PW auf die default Einstellung von Kathrein setzen: root / 0000. Dann gings weiter.
Die erste Abfrage mit Ja bestätigt:
Clipboard01a.jpg
Nun erfolgt die Fehlermeldung als Pop-up: "FTP: error uploading file Enough free disk space? Please try it again".
Clipboard02a.jpg
Habe eine externe 500GB Festplatte angeschlossen auf der noch 30GB frei sind.
Müsste wahrscheinlich mal per Telnet nachgucken wieviel no frei ist auf der Box?
Debug log der Box:
*************************************
Loading backup rules from file...
Loaded backup rule: AllEmu
Loaded backup rule: Channel_List
Loaded backup rule: Keymap
Loaded edit rule: my_FritzBox_example
Loaded backup rule: Network_Interfaces
Loaded backup rule: Oscam
6 backup rule(s) loaded successfully
Supported filesystems changed
Morly's SH4 STB Admin Linux started successfully
Connecting to box via telnet...
Connecting to box via telnet...OK
Telnet prompt received: / #
Command fdisk not found on box
Command blkid not found on box
Command diff not found on box
Command mkfs.vfat not found on box
Command fsck.vfat not found on box
Command dosfslabel not found on box
copy missing tools to box...
Connecting to box via telnet...
Connecting to box via telnet...OK
Telnet prompt received: / #
Command fdisk not found on box
Command blkid not found on box
Command diff not found on box
Command mkfs.vfat not found on box
Command fsck.vfat not found on box
Command dosfslabel not found on box
copy missing tools to box...
Connecting to box via telnet...
Connecting to box via telnet...OK
Telnet prompt received: / #
Command fdisk not found on box
Command blkid not found on box
Command diff not found on box
Command mkfs.vfat not found on box
Command fsck.vfat not found on box
Command dosfslabel not found on box
copy missing tools to box...
Connecting to box via telnet...
Connection timeout - could not connect to box!
Box disconnected
**************************
Telnet 192.168.10.48
BusyBox v1.1.0 (2006.03.02-09:48+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # df -h
Filesystem Size Used Available Use% Mounted on
/dev/mtdblock4 40.0M 11.6M 28.4M 29% /config
/dev/mtdblock3 37.0M 26.4M 10.6M 71% /softwares
/dev/mtdblock5 48.0M 1.2M 46.8M 2% /data
/dev/loop0 25.0M 25.0M 0 100% /app
/dev/sdb2 516.7M 2.4M 514.2M 0% /mnt/hdd0/pvr
/dev/sdb3 1002.1M 65.3M 936.8M 7% /mnt/hdd0/program
/dev/sdb5 9.8G 4.0G 5.8G 41% /mnt/hdd0/media
/dev/sdb7 444.3G 403.1G 41.2G 91% /mnt/hdd0/record
/ #
Geändert von asdf (20.04.2013 um 23:59 Uhr)
Die benötigten Tools werden in das tmp Verzeichnis kopiert, die ext. Platte ist somit egal.
Mach mal ein:
da wird nämlich der Speicher benötigtCode:df -h /tmp
"Every Setback is a Set Up for a Comeback"
Sorry für die späte Antwort..... bin erst jetzt dazu gekommen es auszuprobieren.
Code:/ # df -h /tmp Filesystem Size Used Available Use% Mounted on ramfs 0 0 0 0% /tmp / #Sieht nicht so gut aus, oder? Ich kann die Befehle vermutlich auch anders auf die Box kopieren, aber funktioniert dann der Rest?Code:/ # cd tmp /tmp # ls Standby app_launcher started /tmp #
Geändert von asdf (23.04.2013 um 02:20 Uhr)