Test HDMU_11021 - keine Fernbedienung

[Yannick]

Probleme mit HDMU 11021:
Weder beim ersten Konfigurations-Boot (musste daher Webremote nutzen) noch beim fertig installierten Image funktionierte die Fernbedienung.
Einziger Pluspunkt: Mein zweiter Stick, den ich als "Festplatte" nutze, wurde seit langer Zeit endlich mal ohne Anpassung der fstab erkannt.

Einen Log habe ich leider nicht. Ich tippe mal darauf, dass irgendwo in der rcS der Fehler zu finden sein wird.

Hat hierr noch jemand einen AT700 (z.B. Octagon 1008HD/SE) und hat dieser jemand keine Probleme mit der Fernbedienung?

PS: Könnte es Sinn machen, die rcS aus 11016 zu kopieren und in 11021 zu testen? Im Moment habe ich wieder 11016 drauf.

Edit: Es macht keinen Sinn, auch nach Tausch keine FB.

[Yannick]

Dieses Mal habe ich den Bootvorgang komplett mitgeloggt:

#Log file from Morlys SH4 STB Admin Tool from: Do Mai 23 2013, 18:27:58

*

Board: STb7200-HDBOX  [29-bit mode]


U-Boot 1.3.1 (Apr 28 2010 - 14:35:18) - stm23-0032
---created by TDT for general purpose---

DRAM:  128 MB
Flash:   32 MB
In:    serial
Out:   serial
Err:   serial
init Frontpanel... done, AV700
Hit any key to stop autoboot:  1  0 
bootmenu_timeout:2000,default:2
add entry:0 - FLASH
add entry:1 - USB
add entry:2 - NEBULA
add entry:3 - USB III
add entry:4 - USB IV
add entry:5 - empty
add entry:6 - empty
add entry:7 - empty
add entry:8 - empty
add entry:9 - E FLASH
entering bootmenu - default:2 - NEBULA
USB:   scanning bus for devices... 4 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
loading from usb 0:2


1716771 bytes read
## Booting image at a5000000 ...
   Image Name:   Linux-2.6.32.46_stm24_0209
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1716707 Bytes =  1.6 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS1,115200 root=/dev/sda2 rw mem=128m ip=192.168.178.33:192.168.178.37:192.168.178.1:255.255.255.0:AT700:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 nwhwconf=device:eth0,hwaddr:00:1e:b8:00:35:ad init=/bin/devinit - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
WAIT 1 min
Seems to be the first run - Making devices in /dev...
Starting makedev
CI=TRUE
TUNER=1
HDMI_CEC=FALSE
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
mount: mounting /dev/sdb on /hdd failed: Invalid argument
Cleaning /tmp /var/run /var/lock.
Hostname: AT700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
/etc/init.d/rcS: line 551: /bin/eplayer3: not found
Model: octagon1008
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis HDBOX RemoteControl
RemoteControl Map:
                MENU - 04 - 139
                 RED - 4B - 398
               GREEN - 4A - 399
              YELLOW - 49 - 400
                BLUE - 48 - 401
                EXIT - 1C - 102
                TEXT - 0D - 388
                 EPG - 08 - 365
              REWIND - 58 - 168
         FASTFORWARD - 5C - 208
                PLAY - 55 - 207
               PAUSE - 07 - 119
              RECORD - 56 - 167
                STOP - 54 - 128
             STANDBY - 0A - 116
                MUTE - 0C - 113
           CHANNELUP - 5E - 104
         CHANNELDOWN - 5F - 109
            VOLUMEUP - 4E - 115
          VOLUMEDOWN - 4F - 114
                INFO - 06 - 138
                  OK - 1F - 352
                  UP - 00 - 103
               RIGHT - 02 - 106
                DOWN - 01 - 108
                LEFT - 03 - 105
              RECALL - 09 - 396
                ZOOM - 0B - 372
             VFORMAT - 0E - 371
          RESOLUTION - 0F - 375
             TVRADIO - 1A - 373
               SLEEP - 1E - 409
                OPEN - 40 - 394
                 FAV - 41 - 364
               CHECK - 42 - 353
                UPUP - 43 - 414
            DOWNDOWN - 44 - 415
                NEXT - 4C - 407
                LAST - 50 - 412
                 PIP - 51 - 357
                SWAP - 52 - 354
                LIST - 53 - 370
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
Frontpanel Map:
             STANDBY - 00 - 116
                  OK - 06 - 352
                MENU - 05 - 139
            VOLUMEUP - 03 - 115
          VOLUMEDOWN - 04 - 114
           CHANNELUP - 01 - 104
         CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
rm: can't remove '/media/USB/SWAP': No such file or directory
rm: can't remove '/media/USB/HDMU': No such file or directory
rm: can't remove '/media/USB/RECORD': No such file or directory
mount: mounting /dev/sdb on /hdd failed: Invalid argument
starting telnetd
Starting FTP server: vsftpd.
swapon: can't stat 'swapfile1': No such file or directory
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... Simple mixer control 'Analog',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 14 [73%] [on]
Simple mixer control 'SPDIF',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 14 [73%] [on]
udhcpc (v1.21.0) started
Simple mixer control 'HDMI',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 14 [73%] [on]
LOADING E2
starting e2->
Sending discover...
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
Sending select for 192.168.178.33...
Lease of 192.168.178.33 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.178.1
ifconfig: SIOCGIFFLAGS: No such device
done.


(enigma2:5048): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. 
Processor: STx7109

Processor: STx7109

PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k total video mem
4188k usable video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!

LCD resolution: -1 x -1 x -65768000 (stride: 8221000)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is a remotecontrol
failed to open /dev/input/event1
Input device "" is a keyboard
failed to open /dev/input/event2
Input device "" is a remotecontrol
failed to open /dev/input/event3
Input device "" is a remotecontrol
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (36) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 6736 services
scanning for frontends..
opening frontend 0
main thread is non-idle! display spinner!
no spinner DC!
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 25
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!

executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
no profile data available
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
new Harddisk sdb -> /dev/sdb -> /dev/sdb
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  single
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.mein_tv.tv 1
45 entries in Bouquet userbouquet.mein_tv.tv
loading bouquet... /etc/enigma2/userbouquet.hdtv_sky_hd.tv 46
34 entries in Bouquet userbouquet.hdtv_sky_hd.tv
loading bouquet... /etc/enigma2/userbouquet.sky_hdtv.tv 80
24 entries in Bouquet userbouquet.sky_hdtv.tv
loading bouquet... /etc/enigma2/userbouquet.sky_cinema.tv 104
10 entries in Bouquet userbouquet.sky_cinema.tv
loading bouquet... /etc/enigma2/userbouquet.sky__welt___extra.tv 114
37 entries in Bouquet userbouquet.sky__welt___extra.tv
loading bouquet... /etc/enigma2/userbouquet.sky_sport.tv 151
32 entries in Bouquet userbouquet.sky_sport.tv
loading bouquet... /etc/enigma2/userbouquet.austriasat.tv 183
13 entries in Bouquet userbouquet.austriasat.tv
loading bouquet... /etc/enigma2/userbouquet.kinder.tv 196
12 entries in Bouquet userbouquet.kinder.tv
loading bouquet... /etc/enigma2/userbouquet.musik.tv 208
16 entries in Bouquet userbouquet.musik.tv
loading bouquet... /etc/enigma2/userbouquet.oesterreich.tv 224
26 entries in Bouquet userbouquet.oesterreich.tv
loading bouquet... /etc/enigma2/userbouquet.schweiz.tv 250
14 entries in Bouquet userbouquet.schweiz.tv
loading bouquet... /etc/enigma2/userbouquet.italia_tv.tv 264
89 entries in Bouquet userbouquet.italia_tv.tv
loading bouquet... /etc/enigma2/userbouquet.holland.tv 353
23 entries in Bouquet userbouquet.holland.tv
loading bouquet... /etc/enigma2/userbouquet.sky_select.tv 376
14 entries in Bouquet userbouquet.sky_select.tv
loading bouquet... /etc/enigma2/userbouquet.xxx.tv 390
47 entries in Bouquet userbouquet.xxx.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 437
0 entries in Bouquet userbouquet.favourites.tv
16 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.deutsche.radio 1
19 entries in Bouquet userbouquet.deutsche.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 20
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs)
[FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/valis_lcd.ttf...OK (Digital)
[FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Selected keymap does not exist!
Activating language English
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
loadSkin: Screen already defined elsewhere: HDMU_MainMenu
loadSkin: Screen already defined elsewhere: HDMU_SoftcamControl
loadSkin: Screen already defined elsewhere: HDMU_OverclockControl
loadSkin: Screen already defined elsewhere: HDMU_SystemControl
loadSkin: Screen already defined elsewhere: HDMU_SystemInfos
loadSkin: Screen already defined elsewhere: HDMU_ufsup
loadSkin: Screen already defined elsewhere: HDMU_OSDControl
loadSkin: Screen already defined elsewhere: HDMU_VFDControl
loadSkin: Screen already defined elsewhere: HDMU_VideoControl
loadSkin: Screen already defined elsewhere: HDMU_DLNAServer
loadSkin: Screen already defined elsewhere: HDMU_OpenVPN
loadSkin: Screen already defined elsewhere: HDMU_SkinControl
[eSocketMMIHandler] created successfully
loadSkin: Screen already defined elsewhere: HDMUMC_MainMenu
loadSkin: Screen already defined elsewhere: MC_Settings
loadSkin: Screen already defined elsewhere: MC_FavoriteFolders
loadSkin: Screen already defined elsewhere: MC_AudioPlayer
loadSkin: Screen already defined elsewhere: MC_AudioPlaylist
loadSkin: Screen already defined elsewhere: AudioPlayerSettings
loadSkin: Screen already defined elsewhere: Lyrics
loadSkin: Screen already defined elsewhere: MC_WebRadio
loadSkin: Screen already defined elsewhere: MC_WebDown
loadSkin: Screen already defined elsewhere: MC_VideoPlayer
loadSkin: Screen already defined elsewhere: BonkelPlayer
loadSkin: Screen already defined elsewhere: MC_PictureViewer
loadSkin: Screen already defined elsewhere: MC_PicSetup
loadSkin: Screen already defined elsewhere: Selectmusic
loadSkin: Screen already defined elsewhere: MC_VLCServerlist
loadSkin: Screen already defined elsewhere: MC_VLCMedialist
loadSkin: Screen already defined elsewhere: MC_VLCFavoriteFolders
loadSkin: Screen already defined elsewhere: MC_WeatherInfo
loadSkin: Screen already defined elsewhere: WeatherSetup
Media Center: Import VLC Stuff failed
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Component
LINE #    automatically    generated    by    enigma    2
LINE 
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
starting hotplug handler
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x16be374>}
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading  ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.xml']
getStepWithID: start
result: nothing
('en_EN', ('English', 'en', 'EN'))
++++++++++++***++**** VideoWizard-createSummary
Updating values in step 1
set LCD text
wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can see this page on your TV (or select a different input port).\n\nThe next input port will be automatically probed in 20 seconds.', 'displaytext': 'Select video input with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluation': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modeselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Video input selection

Please press OK if you can see this page on your TV (or select a different input port).

The next input port will be automatically probed in 20 seconds.
set LCD text
code self["portpic"].show()
self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 1
self.list: <Components.Sources.List.List object at 0x16da2ec>
self.list: <Components.Sources.List.List object at 0x16da2ec>
self.list: <Components.Sources.List.List object at 0x16da2ec>
self.list: <Components.Sources.List.List object at 0x16da2ec>
self.list: <Components.Sources.List.List object at 0x16da2ec>
self.list: <Components.Sources.List.List object at 0x16da2ec>
setZPosition
dynamic list, calling listInputChannels
listInputChannels: [('Component', 'Component'), ('HDMI', 'HDMI'), ('HDMI-PC', 'HDMI-PC'), ('Scart', 'Scart')]
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['30Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['30Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['30Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['30Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['30Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['30Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
showing config
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x16e2260> >]
setValue 50
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
timeoutCounter: 19
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 33], 'up': True, 'mac': '00:1e:b8:00:35:ad', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
timeoutCounter: 18
timeoutCounter: 17
timeoutCounter: 16
timeoutCounter: 15
timeoutCounter: 14
timeoutCounter: 13
timeoutCounter: 12
timeoutCounter: 11
timeoutCounter: 10
timeoutCounter: 9
timeoutCounter: 8
timeoutCounter: 7
timeoutCounter: 6
timeoutCounter: 5
timeoutCounter: 4
timeoutCounter: 3
timeoutCounter: 2
timeoutCounter: 1
timeoutCounter: 0
selection next item
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['30Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['30Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['30Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['30Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['30Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['30Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI
current: ('HDMI', 'HDMI')
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['30Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['30Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI
down
timeoutCounter: 19
timeoutCounter: 18
timeoutCounter: 17
timeoutCounter: 16
timeoutCounter: 15
timeoutCounter: 14
timeoutCounter: 13
timeoutCounter: 12
timeoutCounter: 11
timeoutCounter: 10
timeoutCounter: 9
timeoutCounter: 8
timeoutCounter: 7
timeoutCounter: 6
timeoutCounter: 5
timeoutCounter: 4
timeoutCounter: 3
timeoutCounter: 2
timeoutCounter: 1
timeoutCounter: 0
selection next item
self.selection: HDMI-PC
input selection moved: HDMI-PC
inputSelect: HDMI-PC
getModeList for port HDMI-PC
modeList: [('PC', ['1024x768', '1280x1024', '1600x1200'])]
modes for port HDMI-PC and mode PC
getModeList for port HDMI-PC
('PC', ['1024x768', '1280x1024', '1600x1200'])
setMode - port: HDMI-PC mode: PC rate: 1024x768
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI-PC
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/HDMI-PC.png
self.selection: HDMI-PC
input selection moved: HDMI-PC
inputSelect: HDMI-PC
getModeList for port HDMI-PC
modeList: [('PC', ['1024x768', '1280x1024', '1600x1200'])]
modes for port HDMI-PC and mode PC
getModeList for port HDMI-PC
('PC', ['1024x768', '1280x1024', '1600x1200'])
setMode - port: HDMI-PC mode: PC rate: 1024x768
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI-PC
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/HDMI-PC.png
self.selection: HDMI-PC
input selection moved: HDMI-PC
inputSelect: HDMI-PC
getModeList for port HDMI-PC
modeList: [('PC', ['1024x768', '1280x1024', '1600x1200'])]
modes for port HDMI-PC and mode PC
getModeList for port HDMI-PC
('PC', ['1024x768', '1280x1024', '1600x1200'])
setMode - port: HDMI-PC mode: PC rate: 1024x768
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI-PC
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/HDMI-PC.png
current: ('HDMI-PC', 'HDMI-PC')
input selection moved: HDMI-PC
inputSelect: HDMI-PC
getModeList for port HDMI-PC
modeList: [('PC', ['1024x768', '1280x1024', '1600x1200'])]
modes for port HDMI-PC and mode PC
getModeList for port HDMI-PC
('PC', ['1024x768', '1280x1024', '1600x1200'])
setMode - port: HDMI-PC mode: PC rate: 1024x768
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI-PC
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/HDMI-PC.png
down
timeoutCounter: 19
timeoutCounter: 18
timeoutCounter: 17
timeoutCounter: 16
timeoutCounter: 15
timeoutCounter: 14
timeoutCounter: 13
timeoutCounter: 12
timeoutCounter: 11
timeoutCounter: 10
timeoutCounter: 9
timeoutCounter: 8
timeoutCounter: 7
timeoutCounter: 6
timeoutCounter: 5
timeoutCounter: 4
timeoutCounter: 3
timeoutCounter: 2
timeoutCounter: 1
timeoutCounter: 0
selection next item
self.selection: Scart
input selection moved: Scart
inputSelect: Scart
getModeList for port Scart
modeList: [('PAL', ['50Hz'])]
modes for port Scart and mode PAL
getModeList for port Scart
('PAL', ['50Hz'])
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Scart
self.selection: Scart
input selection moved: Scart
inputSelect: Scart
getModeList for port Scart
modeList: [('PAL', ['50Hz'])]
modes for port Scart and mode PAL
getModeList for port Scart
('PAL', ['50Hz'])
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Scart
self.selection: Scart
input selection moved: Scart
inputSelect: Scart
getModeList for port Scart
modeList: [('PAL', ['50Hz'])]
modes for port Scart and mode PAL
getModeList for port Scart
('PAL', ['50Hz'])
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Scart
current: ('Scart', 'Scart')
input selection moved: Scart
inputSelect: Scart
getModeList for port Scart
modeList: [('PAL', ['50Hz'])]
modes for port Scart and mode PAL
getModeList for port Scart
('PAL', ['50Hz'])
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  Scart
down
timeoutCounter: 19
timeoutCounter: 18
timeoutCounter: 17
timeoutCounter: 16
timeoutCounter: 15
timeoutCounter: 14
timeoutCounter: 13
timeoutCounter: 12
timeoutCounter: 11
timeoutCounter: 10
timeoutCounter: 9
timeoutCounter: 8
timeoutCounter: 7
timeoutCounter: 6
timeoutCounter: 5
timeoutCounter: 4
timeoutCounter: 3

Im Setup für" Video input selection" habe ich den Log beendet, da die FB keine Funktion hat. Ich hoffe, ihr könnt einen Fehler finden.

Zur Info: Mein Octagon 1008HD hat einen USB-Anschluss. Daran hängt ein USB-HUB mit zwei USB-Sticks.
Stick1 ist in zwei Partitionen geteilt. Die Zweite Partition enthält das HDMU-Image (ext2-Partition, sda2)
Stick2 ist meine "Festplatte" (Ext2-Partition, sdb1)

PS: Gibt es eine Erklärung für den Fehler "mount: mounting /dev/sdb on /hdd failed: Invalid argument"
Mein Stick2 wird seit etlichen Image-Versionen nicht mehr (oder nur beim ersten Einrichten) automatisch eingebunden.

[bonkel]

leider seh ich nix
evremote wird ja sauber gestartet

gehen die tasten an der box?

[Yannick]

Nein, die Tasten (Power/auf/ab) funktionieren nicht
Anmerkung: Ich habe per Webremote das Setup beendet und bei laufendem HDMU-Image alle Tasten am Octagon ausprobiert.

Edit: Mein Receiver empfängt Remote-Signale (zumindest reagiert die rote LED bei Tastendruck)
Im Display steht permanent "BOOTING", obwohl das Image eingerichtet ist und ich per Webremote umschalten kann.

Hier noch ein Log nach dem Setup (letzter Schritt war Installation Vali-Flex-Skin):

Board: STb7200-HDBOX  [29-bit mode]


U-Boot 1.3.1 (Apr 28 2010 - 14:35:18) - stm23-0032
---created by TDT for general purpose---

DRAM:  128 MB
Flash:   32 MB
In:    serial
Out:   serial
Err:   serial
init Frontpanel... done, AV700
Hit any key to stop autoboot:  1  0 
bootmenu_timeout:2000,default:2
add entry:0 - FLASH
add entry:1 - USB
add entry:2 - NEBULA
add entry:3 - USB III
add entry:4 - USB IV
add entry:5 - empty
add entry:6 - empty
add entry:7 - empty
add entry:8 - empty
add entry:9 - E FLASH
entering bootmenu - default:2 - NEBULA
selected: USB
selected: USB
selected: USB
selected: FLASH
selected: FLASH
selected: E FLASH
selected: E FLASH
selected: USB IV
selected: USB IV
selected: USB III
selected: USB III
selected: NEBULA
selected: NEBULA
USB:   scanning bus for devices... 4 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
loading from usb 0:2


1716771 bytes read
## Booting image at a5000000 ...
   Image Name:   Linux-2.6.32.46_stm24_0209
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1716707 Bytes =  1.6 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS1,115200 root=/dev/sda2 rw mem=128m ip=192.168.178.33:192.168.178.37:192.168.178.1:255.255.255.0:AT700:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 nwhwconf=device:eth0,hwaddr:00:1e:b8:00:35:ad init=/bin/devinit - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
Cleaning /tmp.
Hostname: AT700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
Model: octagon1008
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis HDBOX RemoteControl
RemoteControl Map:
                MENU - 04 - 139
                 RED - 4B - 398
               GREEN - 4A - 399
              YELLOW - 49 - 400
                BLUE - 48 - 401
                EXIT - 1C - 102
                TEXT - 0D - 388
                 EPG - 08 - 365
              REWIND - 58 - 168
         FASTFORWARD - 5C - 208
                PLAY - 55 - 207
               PAUSE - 07 - 119
              RECORD - 56 - 167
                STOP - 54 - 128
             STANDBY - 0A - 116
                MUTE - 0C - 113
           CHANNELUP - 5E - 104
         CHANNELDOWN - 5F - 109
            VOLUMEUP - 4E - 115
          VOLUMEDOWN - 4F - 114
                INFO - 06 - 138
                  OK - 1F - 352
                  UP - 00 - 103
               RIGHT - 02 - 106
                DOWN - 01 - 108
                LEFT - 03 - 105
              RECALL - 09 - 396
                ZOOM - 0B - 372
             VFORMAT - 0E - 371
          RESOLUTION - 0F - 375
             TVRADIO - 1A - 373
               SLEEP - 1E - 409
                OPEN - 40 - 394
                 FAV - 41 - 364
               CHECK - 42 - 353
                UPUP - 43 - 414
            DOWNDOWN - 44 - 415
                NEXT - 4C - 407
                LAST - 50 - 412
                 PIP - 51 - 357
                SWAP - 52 - 354
                LIST - 53 - 370
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
Frontpanel Map:
             STANDBY - 00 - 116
                  OK - 06 - 352
                MENU - 05 - 139
            VOLUMEUP - 03 - 115
          VOLUMEDOWN - 04 - 114
           CHANNELUP - 01 - 104
         CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
starting telnetd
Starting FTP server: vsftpd.
swapon: can't stat 'swapfile1': No such file or directory
Deconfiguring network interfaces... Simple mixer control 'Analog',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 14 [73%] [on]
Simple mixer control 'SPDIF',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 14 [73%] [on]
Simple mixer control 'HDMI',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 14 [73%] [on]
LOADING E2
starting e2->
ifdown: interface wlan0 not configured
done.
[set_was_timer_wakeup] no timer aktiv
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc (v1.21.0) started
Sending discover...
Sending discover...
PYTHONPATH: /usr/lib/enigma2/python
Sending select for 192.168.178.33...
Lease of 192.168.178.33 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.178.1
ifconfig: SIOCGIFFLAGS: No such device
done.
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k total video mem
4188k usable video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!

LCD resolution: -1 x -1 x -438444568 (stride: 1128547395)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is a remotecontrol
failed to open /dev/input/event1
Input device "" is a remotecontrol
failed to open /dev/input/event2
Input device "" is a mouse
failed to open /dev/input/event3
Input device "" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (36) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
main thread is non-idle! display spinner!
no spinner DC!
main thread is non-idle! display spinner!
no spinner DC!
loaded 12636 services
main thread is non-idle! display spinner!
no spinner DC!
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 25
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!

executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
new Harddisk sdb -> /dev/sdb -> /dev/sdb
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  single
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.free_tv__tv_.tv 1
22 entries in Bouquet userbouquet.free_tv__tv_.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 23
14 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 37
34 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 71
29 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 99
3 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 102
3 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 105
17 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 122
38 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.austriasat.tv 159
18 entries in Bouquet userbouquet.austriasat.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 176
5 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe23.tv 181
9 entries in Bouquet userbouquet.dbe23.tv
loading bouquet... /etc/enigma2/userbouquet.dbe24.tv 190
24 entries in Bouquet userbouquet.dbe24.tv
loading bouquet... /etc/enigma2/userbouquet.dbe39.tv 213
17 entries in Bouquet userbouquet.dbe39.tv
loading bouquet... /etc/enigma2/userbouquet.csat.tv 226
229 entries in Bouquet userbouquet.csat.tv
loading bouquet... /etc/enigma2/userbouquet.dbe48.tv 455
60 entries in Bouquet userbouquet.dbe48.tv
loading bouquet... /etc/enigma2/userbouquet.mobistar.tv 515
17 entries in Bouquet userbouquet.mobistar.tv
loading bouquet... /etc/enigma2/userbouquet.dbe53.tv 532
14 entries in Bouquet userbouquet.dbe53.tv
loading bouquet... /etc/enigma2/userbouquet.dbe54.tv 546
37 entries in Bouquet userbouquet.dbe54.tv
loading bouquet... /etc/enigma2/userbouquet.dbe55.tv 583
25 entries in Bouquet userbouquet.dbe55.tv
loading bouquet... /etc/enigma2/userbouquet.dbe69.tv 608
11 entries in Bouquet userbouquet.dbe69.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 619
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.dbe37.tv 619
27 entries in Bouquet userbouquet.dbe37.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 646
1602 entries in Bouquet userbouquet.LastScanned.tv
loading bouquet... /etc/enigma2/userbouquet.tntsat.tv 2248
54 entries in Bouquet userbouquet.tntsat.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 2302
22 entries in Bouquet userbouquet.dbe00.tv
25 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
81 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe04.radio 82
19 entries in Bouquet userbouquet.dbe04.radio
loading bouquet... /etc/enigma2/userbouquet.dbe02.radio 101
0 entries in Bouquet userbouquet.dbe02.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 101
0 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.dbe05.radio 101
0 entries in Bouquet userbouquet.dbe05.radio
loading bouquet... /etc/enigma2/userbouquet.dbe06.radio 101
7 entries in Bouquet userbouquet.dbe06.radio
loading bouquet... /etc/enigma2/userbouquet.dbe07.radio 108
6 entries in Bouquet userbouquet.dbe07.radio
loading bouquet... /etc/enigma2/userbouquet.dbe08.radio 114
53 entries in Bouquet userbouquet.dbe08.radio
loading bouquet... /etc/enigma2/userbouquet.dbe14.radio 167
24 entries in Bouquet userbouquet.dbe14.radio
loading bouquet... /etc/enigma2/userbouquet.dbe15.radio 191
8 entries in Bouquet userbouquet.dbe15.radio
loading bouquet... /etc/enigma2/userbouquet.dbe16.radio 199
5 entries in Bouquet userbouquet.dbe16.radio
loading bouquet... /etc/enigma2/userbouquet.dbe21.radio 204
2 entries in Bouquet userbouquet.dbe21.radio
loading bouquet... /etc/enigma2/userbouquet.dbe32.radio 206
6 entries in Bouquet userbouquet.dbe32.radio
loading bouquet... /etc/enigma2/userbouquet.dbe09.radio 212
0 entries in Bouquet userbouquet.dbe09.radio
loading bouquet... /etc/enigma2/userbouquet.dbe10.radio 212
0 entries in Bouquet userbouquet.dbe10.radio
loading bouquet... /etc/enigma2/userbouquet.dbe11.radio 212
0 entries in Bouquet userbouquet.dbe11.radio
loading bouquet... /etc/enigma2/userbouquet.dbe12.radio 212
0 entries in Bouquet userbouquet.dbe12.radio
loading bouquet... /etc/enigma2/userbouquet.dbe17.radio 212
0 entries in Bouquet userbouquet.dbe17.radio
loading bouquet... /etc/enigma2/userbouquet.dbe18.radio 212
0 entries in Bouquet userbouquet.dbe18.radio
loading bouquet... /etc/enigma2/userbouquet.dbe20.radio 212
0 entries in Bouquet userbouquet.dbe20.radio
loading bouquet... /etc/enigma2/userbouquet.dbe22.radio 212
0 entries in Bouquet userbouquet.dbe22.radio
loading bouquet... /etc/enigma2/userbouquet.harmonic.radio 212
0 entries in Bouquet userbouquet.harmonic.radio
loading bouquet... /etc/enigma2/userbouquet.dbe26.radio 212
0 entries in Bouquet userbouquet.dbe26.radio
loading bouquet... /etc/enigma2/userbouquet.dbe27.radio 212
0 entries in Bouquet userbouquet.dbe27.radio
loading bouquet... /etc/enigma2/userbouquet.dbe31.radio 212
0 entries in Bouquet userbouquet.dbe31.radio
loading bouquet... /etc/enigma2/userbouquet.dbe34.radio 212
0 entries in Bouquet userbouquet.dbe34.radio
loading bouquet... /etc/enigma2/userbouquet.dbe35.radio 212
0 entries in Bouquet userbouquet.dbe35.radio
loading bouquet... /etc/enigma2/userbouquet.dbe36.radio 212
0 entries in Bouquet userbouquet.dbe36.radio
loading bouquet... /etc/enigma2/userbouquet.dbe37.radio 212
0 entries in Bouquet userbouquet.dbe37.radio
loading bouquet... /etc/enigma2/userbouquet.dbe39.radio 212
0 entries in Bouquet userbouquet.dbe39.radio
loading bouquet... /etc/enigma2/userbouquet.dbe41.radio 212
0 entries in Bouquet userbouquet.dbe41.radio
loading bouquet... /etc/enigma2/userbouquet.dbe42.radio 212
0 entries in Bouquet userbouquet.dbe42.radio
loading bouquet... /etc/enigma2/userbouquet.t_systems.radio 212
0 entries in Bouquet userbouquet.t_systems.radio
loading bouquet... /etc/enigma2/userbouquet.arqiva.radio 212
0 entries in Bouquet userbouquet.arqiva.radio
loading bouquet... /etc/enigma2/userbouquet.dbe33.radio 212
0 entries in Bouquet userbouquet.dbe33.radio
loading bouquet... /etc/enigma2/userbouquet.dbe43.radio 212
0 entries in Bouquet userbouquet.dbe43.radio
loading bouquet... /etc/enigma2/userbouquet.jmc.radio 212
0 entries in Bouquet userbouquet.jmc.radio
loading bouquet... /etc/enigma2/userbouquet.irib.radio 212
0 entries in Bouquet userbouquet.irib.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 212
0 entries in Bouquet userbouquet.favourites.radio
39 entries in Bouquet bouquets.radio
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs)
[FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/enigma2/Vali.HD.flex/hd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Selected keymap does not exist!
Activating language Deutsch
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
loadSkin: Screen already defined elsewhere: HDMU_MainMenu
loadSkin: Screen already defined elsewhere: HDMU_SoftcamControl
loadSkin: Screen already defined elsewhere: HDMU_OverclockControl
loadSkin: Screen already defined elsewhere: HDMU_SystemControl
loadSkin: Screen already defined elsewhere: HDMU_SystemInfos
loadSkin: Screen already defined elsewhere: HDMU_ufsup
loadSkin: Screen already defined elsewhere: HDMU_OSDControl
loadSkin: Screen already defined elsewhere: HDMU_VFDControl
loadSkin: Screen already defined elsewhere: HDMU_VideoControl
loadSkin: Screen already defined elsewhere: HDMU_DLNAServer
loadSkin: Screen already defined elsewhere: HDMU_OpenVPN
loadSkin: Screen already defined elsewhere: HDMU_SkinControl
[eSocketMMIHandler] created successfully
[SKLDR] Loading skin  /usr/lib/enigma2/python/Plugins/Extensions/WebMedia/skin.xml
loadSkin: Screen already defined elsewhere: HDMUMC_MainMenu
loadSkin: Screen already defined elsewhere: MC_Settings
loadSkin: Screen already defined elsewhere: MC_FavoriteFolders
loadSkin: Screen already defined elsewhere: MC_AudioPlayer
loadSkin: Screen already defined elsewhere: MC_AudioPlaylist
loadSkin: Screen already defined elsewhere: AudioPlayerSettings
loadSkin: Screen already defined elsewhere: Lyrics
loadSkin: Screen already defined elsewhere: MC_WebRadio
loadSkin: Screen already defined elsewhere: MC_WebDown
loadSkin: Screen already defined elsewhere: MC_VideoPlayer
loadSkin: Screen already defined elsewhere: BonkelPlayer
loadSkin: Screen already defined elsewhere: MC_PictureViewer
loadSkin: Screen already defined elsewhere: MC_PicSetup
loadSkin: Screen already defined elsewhere: Selectmusic
loadSkin: Screen already defined elsewhere: MC_VLCServerlist
loadSkin: Screen already defined elsewhere: MC_VLCMedialist
loadSkin: Screen already defined elsewhere: MC_VLCFavoriteFolders
loadSkin: Screen already defined elsewhere: MC_WeatherInfo
loadSkin: Screen already defined elsewhere: WeatherSetup
Media Center: Import VLC Stuff failed
[Picon] adding path: /picon/
[Picon] adding path: /autofs/sda2/picon/
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: HDMI mode: 1080i rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI
LINE #    automatically    generated    by    enigma    2
LINE 
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
starting hotplug handler
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x170e1ec>}
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
fp_control: SW Version 1.03
Model: octagon1008
vBoxType: 8
Selected Model: Fortis HDBOX frontpanel control utility
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
, WAKEUPDECREMENT  300
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
[Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Vali.HD.flex/skin.xml}: source 'HbbtvApplication' was not found in screen 'InfoBar'!. Please contact the skin's author!
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
setValue 45
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
playing 1:0:1:79E0:443:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0443:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12226500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1626 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:79E0:443:1:C00000:0:0:0:
allocate demux
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
[SEC] invalidate current switch params
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 33], 'up': True, 'mac': '00:1e:b8:00:35:ad', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x18a4e78 running
[eEPGCache] channel 0x18a4e78 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0065), and 1 audio stream(s) (0067), and the pcr pid is 0065, and the text pid is 0066
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=101, apid=103
DMX_SET_PES_FILTER(0x65) - pcr - ok
DMX_SET_PES_FILTER(0x67) - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x65) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x66) - ttx - ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 66
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
TuxTxt running thread...(066)
disable teletext subtitles
[__evUpdatedInfo]
[writeChannelName]
vfd display text: Eurosport Deutschland
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:1:79E0:443:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:79E0:443:1:C00000:0:0:0:
RemovePopup, id = ZapError
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
PATready
use pmtpid 0118 for service_id 79e0
eventNewProgramInfo 0 0
have 1 video stream(s) (0065), and 1 audio stream(s) (0067), and the pcr pid is 0065, and the text pid is 0066
decoder state: play, vpid=101, apid=103
[__evUpdatedInfo]
[writeChannelName]
vfd display text: Eurosport Deutschland
[showCrypted]
[showDolby]
[showMp3]
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
[__evUpdatedEventInfo]
sdt update done!
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:17:32
[eDVBLocalTimerHandler] m_time_difference is 422644555
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
[EPGC] 12016 events read from /hdd/epg.dat
[EPGC] next update in 2 sec
[EPGC] start caching events(1369329455)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1369329462)
[EPGC] schedule finished(1369329472)
[EPGC] stop caching events(1369329472)
[EPGC] next update in 60 min

Jetzt taucht "Selected keymap does not exist!" auf. Ich habe spaßeshalber eine andere keymap (neutrino) herunter geladen und neu gebootet, aber auch danach ging die FB nicht.

[santa]

Was mich mal wieder verwundert, das image wurde 64 mal vom Server geladen und sonst keine Reaktion...

habe eben mal alle changes grob überflogen, eigentlich nix auffällig.
Ich lass wahrscheinlich nachher neu bauen, morgen dann neu testen

[Yannick]

Vielleicht betrifft es nur meine AT700. Die meisten hier nutzen diese Box ja nicht bzw. posten keine Probleme. 4 - 5 Downloads stammen von mir, da ich ausschließen wollte, dass ein DL-Fehler vorliegt. Die Installation habe ich aber nur 3 Mal wiederholt und jedes Mal war keine FB verfügbar.

Edit: Testweise habe ich nun ohne STICK2 gebootet, aber das hat auch nichts gebracht.

[santa]

Fehler wurde gefunden, sollte dann morgen ok sein

[Yannick]

Mit HDMU_11040 funktioniert die Fernbedienung.