Hi,
When i zap, sometimes on hd chanels, the box block ans i have to reboot it.
It happens when oscam has a timeout on a hd chanel... do you have an idea?
thanks in advance,
Hi,
When i zap, sometimes on hd chanels, the box block ans i have to reboot it.
It happens when oscam has a timeout on a hd chanel... do you have an idea?
thanks in advance,
not if you dont provide more Infos! Whats your setup???
VU+ solo² (HDMU)
GM 990 Reloaded (HDMU)
Edision Pingulux Plus (HDMU)
Panasonic TX-P50GTW60, SANYO PLV-Z5
DENON AVR-X3200W
2x Acoustic Research Helios F15 Executive
2x Acoustic Research Helios B11 Executive
1x Acoustic Research Helios C13 Executive
1x Acoustic Research Chronos W38
HP Microserver Gen8 (intel XEON 1265V2l, 16GB RAM)
Schon gelesen? -> Frequently Asked Questions (FAQ)
thanks for answer,
i have a GM spark triplex with the last hdmu image.
i have try without my NAS but same.
i use oscam without card inside.
i dont use epg yet and picons are on my usb key.
i use the swap but without swap its the same.
Geändert von frankyjones (03.06.2013 um 20:07 Uhr)
For triplex you dont need swap, there is enough ram.
Oscam without card will not supportet!
GB Quad 4K + GB Quad + Octagon SF4008 + Formuler F1
ok i will remove swap and activate 1 card that i dont really need.
I think they are less freezes and lees reboot when activate my card but sometimes (3 or 4 times a day) i have to reboot.
This is my oscam.conf:
Code:################## General Instruction - oscam.conf #################### # # # per default no changes from the user are needed # # but verify the IP-range oh your local Network # # # ############################################################################ [global] nice = -20 disablelog = 1 loghistorysize = 200 logfile = /tmp/oscam.log usrfile = /tmp/oscamuserfile [monitor] nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255 appendchaninfo = 1 [webif] httpport = 5500 httpuser = root httppwd = xxxx httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 [dvbapi] enabled = 1 au = 1 decodeforever = 1 boxtype = duckbox user = user ###### for E2 set pmt_mode = 0 ########### ###### for Titan set pmt_mode = 4 ########### pmt_mode = 0 ######## end of file ########
Geändert von suchmich1983 (05.06.2013 um 21:46 Uhr) Grund: formatiert..
I have less reboot but i need sometimes to reboot again...
Any idea?
That,s all from your config..??
take this..in your config global,,
HTML-Code:[global] logfile = /var/log/oscam.log nice = -10 maxlogsize = 150 waitforcards = 1 preferlocalcards = 1
and delete decodeforever in your config please,,
Your Reader and user config post please ,,
Hello,
I'changed my config...and begin to test now but i still have crashes.
This is my user and reader config:
oscam.user :
[account]user = triplex
au = 1
group = 1
oscam.server :
oscam.conf :[reader]
label = vps_cs378x
protocol = cs378x
device = XXXXXXXX
user = triplex
password = triplex
group = 1
[reader]
label = tsat_cs378x
protocol = cs378x
device = XXXXXXXX
user = XXXXX
password = XXXXX
services = good_telesat
caid = 0100
ident = 0100:000000,00006D
group = 1
[reader]
label = tntsat_internal
protocol = internal
device = /dev/sci0
services = good_tntsat
caid = 0500
detect = cd
mhz = 500
ident = 0500:FFF400,030B00
aeskeys = 0500@030B0XXXXXXXXXXXXXXXXXXXX
group = 2
ratelimitecm = 4
ratelimitseconds = 11
[global]
logfile = /var/log/oscam.log
nice = -10
maxlogsize = 150
waitforcards = 1
preferlocalcards = 1
[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
[webif]
httpport = 5000
httpuser = XXXXXX
httppwd = XXXXXX
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = triplex
###### for E2 set pmt_mode = 0 ###########
###### for Titan set pmt_mode = 4 ###########
pmt_mode = 0
If i have a timeout and don't zap directly, i have the hdmu logo again and i need to reboot with putty...
Thanks again for your answer!
Geändert von frankyjones (16.06.2013 um 14:23 Uhr)
Nobady has an idea pliz?
I don't have this with a 800hd. 'don't understand...