also in the first post of the admin tool, name is:
SH4_STB_Admin_Tool_Morly_v1.4_DLLs.zip
also in the first post of the admin tool, name is:
SH4_STB_Admin_Tool_Morly_v1.4_DLLs.zip
"Every Setback is a Set Up for a Comeback"
sorry i found only the admintoo,but no dll files
in my signature you find:
>> SH4 STB Admin Tool << (in yellow/orange),
press it
scroll down to the end of the first post, there you find 3 attachments - one is the DLL package
or just click here
"Every Setback is a Set Up for a Comeback"
yes now i got it.everything now done.what next?
ok, one last thing, do you have a working internal hdd?
after this we start the installation... :-)
"Every Setback is a Set Up for a Comeback"
no internal hard disc.I use 8gb sd mini card with card reader.
OK - start admin tool and connect,
then change to tab "HDD/Images".
There change to: "Manage Partitions" - change number of partitions to whatever you like, filesystem to ext2 and press the green tick (will take some time)
When done change back to "Manage Images", there you should see your new partitions.
Make a right click on the first partition and say: "Install Image" - choose the downloaded archive from here (Image)
If done please make a screenshot an post it
"Every Setback is a Set Up for a Comeback"
does "CONNECT" means to connect to internet?or to receiver?cuberevo250hd(which is same as ipbox91hd has no rs232 port,and there is only one usb port)
Hi mada - the tool connects via ethernet, just start the tool, enter the IP address of the box, check the password and press connect,
no rs232 and friends needed
"Every Setback is a Set Up for a Comeback"
ok,i understood.this will take time to do.as i can use here only usb connect internet,while my receiver cannot.i,ll try and let u know.