Dear,
how to connect external harddrive to Octagon running HDMU enigma2 USB image? approciate your help.
thanks
sergey
Dear,
how to connect external harddrive to Octagon running HDMU enigma2 USB image? approciate your help.
thanks
sergey
fdsik -l
umount /dev/sdx1
fsdisk /dev/sdx
d
n
p
1
w
mkfs.ext3 /dev/sdx1
tune2fs -L RECORD /dev/sdx1 (if timeshift wont work rename disk to "hdd")
mkdir /media/RECORD
mount /dev/sdx1 /media/RECORD
mkdir /media/RECORD/movie
wooowoo, thanks a lot, but somehow I can't understand anything .
could you please explain in more details, thanks.
*g*
then download this tool for windows http://www.partitionwizard.com/free-...n-manager.html
Create an ext3 partition for the entire disk and label it "RECORD"
now you are talking English ,sorry but I will distrub you more.
as I mentioned that I'm running the E2 from USB flash drive, do you mean to to insert another hdd (or USB flash) with ext3 partition or I need to re-partition the current USB drive to fat32(with copying the root&uImage to) and ext3 parition?
please bear with me.
Ok, we're getting closer. I'm sorry, I didn't recognise that you boot from usb.
Then you need three partitions, boot, swap and record. Procedure should be the similar to this post:
http://www.hdmedia-universe.com/boar...lash-Anleitung
Give the google translator a try :-)
Hi, that seems little complicated, but no problem i will give a shot, can please point me where i can find a guide for installing the HDMU E2 on the internal memory instead of running from the USB,
thanks
sergey
sorry but i can't find any bootargs for octagon 1008p, what i need to run the E2 from USB and record in the same USB flash drive...what i did is the following:Ok, we're getting closer. I'm sorry, I didn't recognise that you boot from usb.
Then you need three partitions, boot, swap and record. Procedure should be the similar to this post:
http://www.hdmedia-universe.com/boar...lash-Anleitung
Give the google translator a try :-)
1. I'm running E2 HDMU from USB in Octagon 1008pse+.
2. I connected another USb flash to the front port.
3. I created three partitions (vfat-swap, ext3 - mini1, ext3-RECORD)
4. I mount the partitions, copy the image to the ext3-mini1.
5. I unmount the paritions.
6. disconnect the front USB and connect it to the back USB (so i have only one USB connected).
7. reboot ---and with no luck, the box started with octagon fm.
approciate any ideas.
thanks
you Need only two partitions.......
first with fat32 secound with ext4-record
but it is better to use a stick for Image and a hdd for record...
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
thanks bonkel, it's working great now...
i understand that it's working better with hdd for recording, but where to plug it if i have a 2 years old daughter likes to unplug everything