I am trying to build an E2 image for a Fortis HS7110 using the max-git as starting point. I have reached the point where the image gets built without errors, and I have generated a root.img.
The receiver is a Rebox RE-2200 which has loader 6.46 with USB boot enabled (hold channel down during power up).
HDMU images load fine:
My own image does not load. It loads the kernel:Code:FrTs (Re)start USB... Front USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found 262144000 root.img 3035106 uimage 2 file(s), 0 dir(s) reading uImage ........................................................................................................................................................................................................................................................................................................ ret=> 3035106 Wait [1] Wait [2] Wait [3] Wait [4] Wait [5] Wait [6] ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted. /mnt/root.img: clean, 5344/64000 files, 100943/256000 blocks mount root INIT: version 2.86 booting init frontpanel WAIT 1 min mknod: /dev/avs: File exists mknod: /dev/fuse: File exists Mount /dev in tmpfs Copying device nodes to /dev Starting portmap daemon...Bus error failed! Loading autofs Starting autofsMounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp /var/run /var/lock. Hostname: HS7110. init stmfb LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x40400000 seeking to 0 ~ seeking to 1aaf00 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x40000000 seeking to 0 ~ seeking to 186e00 init embx init AVS skip mpeg2 starting telnetd Starting FTP server: vsftpd. Model: hs7110 [and so on...]
And then nothing more happens.Code:FrTs (Re)start USB... Front USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found 262144000 root.img 1800833 uimage 2 file(s), 0 dir(s) reading uImage ............................................................................................................................................................................... ret=> 1800833
However, if I use the HDMU uImage and my own root.img, loading is successful, but a crash occurs after starting the root because of the non-matching kernel:
The same problems occur with a Rebox RE-4200 with loader 6.26 (HS7810A, other images of course).Code:FrTs (Re)start USB... Front USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found 262144000 root.img 3035106 uimage 2 file(s), 0 dir(s) reading uImage ........................................................................................................................................................................................................................................................................................................ ret=> 3035106 Wait [1] Wait [2] Wait [3] Wait [4] Wait [5] Wait [6] ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted. root.img: clean, 6655/64000 files, 121097/256000 blocks mount root INIT: version 2.86 booting init frontpanel WAIT 1 min Mount /dev in tmpfs Copying device nodes to /dev Starting portmap daemon.... Starting DEBUG Interface Mounting local filesystems... Cleaning /tmp /var/run /var/lock. Hostname: hs7110. starting telnetd init stmfb insmod: can't insert '/lib/modules/stmcore-display-sti7111.ko': unknown symbol in module, or unknown parameter insmod: can't insert '/lib/modules/stmfb.ko': unknown symbol in module, or unknown parameter LOADING MODULES load a firmware copLoadFile (file /boot/audio.elf) stslave: Kernel Version: 24 base_address 0x40400000 seeking to 0 ~ seeking to 1aaf00 load v firmware copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x40000000 seeking to 0 ~ seeking to 186e00 init embx Segmentation fault
Apparently I am doing something wrong, but I have no idea what. Can anybody tell me the solution?
Regards,
Audioniek.