Media centre issue

[ray._b]

Hi guys, here is a copy of the output, although there appears to be some missing from the beginning. Hopefully this will be of use. If not let me know.

Cheers

frontend not yet ready? try to open frontend again...
failed! (/dev/dvb/adapter0/frontend0) Device or resource busy
found 1 adapter, 0 frontends(0 sim) and 3 demux, boxtype 16
Use valid Linux Time  (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait19.png
found 18 spinner!


executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
new Harddisk sdb -> /dev/sdb -> /dev/sdb
Reading satellites.xml
sec config cleared
slot: 0 configmode: simple
diseqcmode:  single
sec config completed
[Picon] adding path: /media/hdd/picon/
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs)
[FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/valis_lcd.ttf...OK (Digital)
[FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
Selected keymap does not exist!
Activating language English
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
[NetworkServer] set language to  en
[NetworkServer] set language to  en
[NetworkServer] fallback to default translation for setupSamba
[NetworkServer] fallback to default translation for Activate and configurate your Samba-Server
[NetworkServer] fallback to default translation for setupNFS
[NetworkServer] fallback to default translation for Activate and configurate your NFS-Server
LINE #  automatically   generated       by      enigma  2
LINE
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: HDMI mode: 1080i rate: 60Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor:  HDMI
Plugin  Extensions/nStreamVOD failed to load: No module named nStreamVOD.plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/nStreamVOD
Plugin  Extensions/Facebook failed to load: No module named Facebook.plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/Facebook
[VLC] Checking for buildin servicets ...  no
[VLC] Checking for existing and usable servicets.so ...  No module named servicets
[VLC] Checking for usable gstreamer service ...  yes
[VLC] fallback to default translation for A video streaming solution based on VLC
wsize 1280
BBCiMenu
BBC One
BBC Two
BBC Three
BBC Four
CBBC
CBeebies
BBC Parliament
BBC News
BBC Alba
BBC HD
[eSocketMMIHandler] created successfully
Plugin  Extensions/Blu-ray failed to load: No module named Blu-ray.plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/Blu-ray
[WebInterface] set language to  en
Plugin  Extensions/TeraFilms failed to load: No module named TeraFilms.plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/TeraFilms
[WebInterface] set language to  en
[WebInterface] fallback to default translation for Webinterface
[WebInterface] fallback to default translation for Configuration for the Webinterface
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0xe9880c>}
starting hotplug handler
Starting CuberevoVFD
[Toplevel.importExternalModules] Imported external module: Example
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:443 auth=True ssl=True
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
accel alloc failed


ERROR: accelAlloc failed
fp_control: SW Version 1.03
Model: cuberevo-mini
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S
, WAKEUPDECREMENT  300
17
warning, skin is missing element RassLogo in <class 'Screens.RdsDisplay.RdsInfoDisplay'>
[SKIN] No skin to read...
warning, skin is missing element UnhandledKeyPixmap in <class 'Screens.UnhandledKey.UnhandledKey'>
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
main thread is non-idle! display spinner!
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
setValue 35
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
playing 1:0F4C:7F211A0000:0:0:0:
accel alloc failed


ERROR: accelAlloc failed
[EPGC] 48614 events read from /hdd/epg.dat
[Timeshift enabled]
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 07f2:0002
allocate Channel: res -7
DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(17)
poll: unhandled POLLERR/HUP/NVAL for fd 33(17)
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[194, 168, 4, 100], [194, 168, 8, 100]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 2], 'up': True, 'mac': '0018:02:48:d9', 'dhcp': True, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)