Hello ;
I have done a mistake , i load into my hs7819 box a wrong u-boot image which is for hs 7119 , now i'm stuck with this (putty log )
I tried to load the correct one ( usb_uboot.img for hs7819) using CH UP method but noway ; log :Code:Board: STx7111-7119 [32-bit mode] U-Boot 1.3.1 (Nov 16 2013 - 09:55:12) - stm23_0046 DRAM: 256 MiB NAND: 256 MiB *** Warning - bad CRC or NAND, using default environment In: serial Out: serial Err: serial set ethaddr 00:1e:b8:0a:ae:a3 done Setup mac address. done Hit any key to stop autoboot: 0 (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found ** Can't read from device 0 ** ** Unable to use usb 0:1 for fatload ** ## Booting image at 80000000 ... Bad Magic Number NAND read: device 0 offset 0x60000, size 0x300000 reading NAND page at offset 0x60000 failed 3145728 bytes read: ERROR ## Booting image at 80000000 ... Bad Magic Number 7119 >
How can I solve this ? any help please .Code:Board: STx7111-7119 [32-bit mode] U-Boot 1.3.1 (Nov 16 2013 - 09:55:12) - stm23_0046 DRAM: 256 MiB NAND: 256 MiB *** Warning - bad CRC or NAND, using default environment In: serial Out: serial Err: serial set ethaddr 00:1e:b8:0a:ae:a3 done Setup mac address. done Hit any key to stop autoboot: 0 (Re)start USB... USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found reading uImage ** Unable to read "uImage" from usb 0:1 ** ## Booting image at 80000000 ... Bad Magic Number NAND read: device 0 offset 0x60000, size 0x300000 reading NAND page at offset 0x60000 failed 3145728 bytes read: ERROR ## Booting image at 80000000 ... Bad Magic Number 7119 >
just for info , i have a copy of each mtdx , which i saved before with comand line (dd if=/dev/mtdx of=/tmp/mtdx ); if it can be useful.
RegardsCode:dev: size erasesize name mtd0: 00400000 00020000 "boot" mtd1: 00300000 00020000 "kernel" mtd2: 06000000 00020000 "rootfs" mtd3: 08000000 00020000 "NAND 2" mtd4: 08000000 00020000 "NAND 3" mtd5: 00100000 00020000 "config" mtd6: 09000000 00020000 "user" mtd7: 10000000 00020000 "ALL" mtd8: 00500000 00020000 "config1"