neustes image schon getestet?
neustes image schon getestet?
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Yes ... it works [12316 oe 1344]!
I could not try everything on AZ Ultra HD version ...
I had some trouble finding the right combination for the frequency of the card reader with oscam8837 and TivuSat N3 card (the only combination that works is cardmhz = 368 mhz = 500) while other from feed:ymod not SC init, 3c ok (always) ... but the ecm time is up approximately 650 ms and occasionally produces video freeze!
The zap time (approximately):
crypt to crypt = 6 s
crypt to fta = 3 s
fta to fta = 2 s
- HDMU Media Center = OK [AVI-MKV-Mp3 simple file play test] and TS play from CIFS Net Mount VodafoneTV(DVB-T) recordings storage device !
Ciao & Thanks
Geändert von arci (23.04.2014 um 15:48 Uhr)
Ja, heute kurzt image "HDMU_12302_AzboxHD_OE_1343_Flash" getestet und alles was ich normaleweise benutze leuft wie es sein sollte, für mich nach der "HDMU_11893_AzboxHD_OE_858_Flash" das beste image.
mfg.
PD. habe gesehen das es wieder eine neuer imege giebst werde es gleich mal einspielen und zur sehen wie dieses leuft.
PD2. Online update gemacht und alles leuft weiter so gut wie vorher...
HDMU_12316_AzboxHD_OE_1344_Flash.zip WIfI NOT OK
HDMU_12302_AzboxHD_OE_1343_Flash.zip WiFi not OK
Can't Connect to the Internet
nothing changed with wifi..
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Could not connect to the router. Version 851 is ok. Keymap for audio subtitle fix is stil required, hooked him
I was wondering that after installing RTi-SYS Plugin I can't control the fan of my premium+ (Open Webif > Receiver-Informationen > Modell).
I'm new in developing python plugins and studied the code from RTi-SYS https://github.com/OpenAZBox/RTi-SYS.
In lines 307, 431, 446 and 575 of https://github.com/OpenAZBox/RTi-SYS...ster/plugin.py it tries to determine and assign the model type. Example line 307:
This is later important to get the correct entries in Einstellungen > System > ...Code:hw_type = HardwareInfo().get_device_name() if hw_type == "me" or hw_type == "minime" : self.LEDtimeTimer.callback.append(self.updateLED) if hw_type == "minime" : self.RtiminimeTimer.callback.append(self.updateCR) elif hw_type == 'elite' or hw_type == 'premium' or hw_type == 'premium+' or hw_type == 'ultra' : self.LEDtimeTimer.callback.append(self.updateLEDHD) if hw_type == 'ultra' or hw_type == 'premium+': self.FANtimeTimer.callback.append(self.updateFAN)
Because I only get the [A/V settings +] entry something went wrong: I think that it runs in the last else in line 588.Code:def Plugins(**kwargs): hw_type = HardwareInfo().get_device_name() if hw_type == 'ultra' or hw_type == 'premium+': return [ PluginDescriptor(name="FanCtrl", description="FAN Controll", where = PluginDescriptor.WHERE_MENU, fnc=startSetup), PluginDescriptor(name="AVp_setup", description="scan mode & interlaced algo", where = PluginDescriptor.WHERE_MENU, fnc=startSetup2), PluginDescriptor(where=[PluginDescriptor.WHERE_SESSIONSTART], fnc=sessionstart) ] elif hw_type == 'minime': return [ PluginDescriptor(name="CRClock_setup", description="CR set freq", where = PluginDescriptor.WHERE_MENU, fnc=startSetup1), PluginDescriptor(name="AVp_setup", description="scan mode & interlaced algo", where = PluginDescriptor.WHERE_MENU, fnc=startSetup2), PluginDescriptor(where=[PluginDescriptor.WHERE_SESSIONSTART], fnc=sessionstart) ] else: return [ PluginDescriptor(name="AVp_setup", description="scan mode & interlaced algo", where = PluginDescriptor.WHERE_MENU, fnc=startSetup2), PluginDescriptor(where=[PluginDescriptor.WHERE_SESSIONSTART], fnc=sessionstart) ]
Because I dont't know where to find the missing function HardwareInfo(): hw_type = HardwareInfo().get_device_name() I easily assign it manually to hw_type = premium+ 4 times in the lines 307, 431, 446 and 575.
Does anybody know an alternative to determine this? Which function does Open Webif use to determines it?
And yes, if I change the code, delete the plugin.pyo and restart the box I have also the entry [Fan Set] in OSD and can change anything.
I have tested it and it works.
That what I heard then was the HDD (ST3500630AS) which goes in standby after some minutes with my init-script.[/B]
Geändert von blueice_haller (14.08.2014 um 21:12 Uhr)
MFG blueice_haller | Kabel / 19,2° / 28,2°
Octagon SF1028P (AT7500), Audioniek rev1364 @ Kingston DTMCK 8GB
AzBoxHD, HDMU 12411 OE 1439 Flash @ DeLock 2GB DOM
2x Golden Interstar Xpeed LX3, openATV
Plugins: epgsearch, fritzcall, mediaportal, webradioFS, metrixhd, skins-mymetrix, rtmpdump, werbezapper
Senderliste: DreamBox Edit
Android: DreamDroid
Plugins früher getestet: dreamexplorer, mediainfo, partnerbox, sambaserver, iptv updater, network-dropbear, emc, foreca, shoutcast, wiki
Brauch kurze Hilfe,
das Image besteht aus cram.img und kernel.img
Wie können die auf welche Partition geflasht werden (via telnet)??
Wohl besser nicht via dd, oder?
"Every Setback is a Set Up for a Comeback"
Wird nomaleweise mit en eigenes program geflash "AzUp 2.2.7" ist ein windows program :-( früer gabs einen in java aber der funzioniert jetz nicht mehr?
mfg
hab ja das Ding entpackt und die beiden Files liegen, muss nur wissen welches mtd wofür ist (vermute kernel=mtd4 und rootfs=mtd0)
"Every Setback is a Set Up for a Comeback"