Kannst Du mir eventuell funktionierende bootargs posten?Die findest Du in der Zip mit drin. Heist übrigens Enigma_installer.ftd, hab mich verschrieben. Zum Installieren gibt es ein Tool von Topfield Namens TF-Down. Die dritte Möglichkeit wäre noch, auch wieder seriell den Start abbrechen und manuell die Bootargs zu reparieren. Das geht auch über Morlys Tool.
Wird aber heut nichts mehr. Aber morgen ist das kein Problem. Stell ich Dir dann hier ein.
GB Quad 4K + GB Quad + Octagon SF4008 + Formuler F1
Danke....
Hat sich erledigt.....
habe erst wieder eine originalsoft per r232 installiert.
jetzt geht alles wieder.
teotzdem danke...
Geändert von bredo (25.04.2014 um 08:46 Uhr)
Ok, wenn Du wieder auf Original bist, ist das Deine Sache (oder hast Du nur den Umweg über original genommen?). Für alle anderen, hier ein Satz funktionierende Bootargs für den Topf:
Code:TF7700> printenvbaudrate=115200 board=tf7700 monitor_base=0xa0030000 monitor_len=0x00020000 monitor_sec=1:10-11 load_addr=0x85000000 unprot=protect off $monitor_sec update=erase $monitor_sec;cp.b $load_addr $monitor_base $monitor_len;protect on $monitor_sec bootdelay=1 bootcmd=usb reset;fatload usb 0 85000000 uImage;bootm;setenv bootargs $ba1;bootm 80060000 ba1=console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.0.4:192.168.0.1:192.168.0.1:255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33 bootargs=console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.0.4:192.168.0.1:192.168.0.1:255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33 ipaddr=192.168.0.4 serverip=192.168.0.1 gateway=192.168.0.1 netmask=255.255.255.0 dnsip=192.168.0.2 192.168.0.1 ethaddr=00:3e:9e:11:22:33 stdin=serial stdout=serial stderr=serial
GB Quad 4K + GB Quad + Octagon SF4008 + Formuler F1
In amiko alien2, spark7162, with last HDMU12212 in Morly's admintool - box status I've no more the situation of memory
morlys12212.jpg
I've seen that this 12212 has modified something in telnet. It will be corrected in new admintool nextrelease? When?
it will - yes
"Every Setback is a Set Up for a Comeback"
Hi Morly,
I use your tool successfully so far to flash my Pingulux (Spark). Pingulux has just one USB socket and so far I have connected one USB 16GB flash which is partitioned with your tool (there are movie partition, swapfile etc.) But now I would like to connect 300GB HDD as well in order to make recordings.
I would like to use USB hub to split one USB socket into two.
But I am not really sure if I can flash Pingulux safely with morly tool when there will be USB hub and two memory drive (HDD, USB flash) connected to him.
PLease let me know your opinion.
Thank you in advance.
Argus Pingulux problem-free, AV Receiver Yamaha RX-V663, Plasma LG-50PS6000
Hi, no problem at all.
We use >10 partitions together with the flashing procedure of the boxes...
"Every Setback is a Set Up for a Comeback"
OK, thanks
Argus Pingulux problem-free, AV Receiver Yamaha RX-V663, Plasma LG-50PS6000
...mal ne grundsätzliche Frage,hat jemand mit dem Morly-Tool ein Full-Backup auf dem Spark Pingu problemlos zurückgespielt ?
...hab da das Prob,daß im Display ewig U-ld kommt und es dann irgendwann "aufhört" ohne das da was geflasht wurde ...zumindest ist nach nem Neustart das alte Image immer noch auf der Box....
..bei der Kathie 913 übrigens problemlos !
Gruss Joker7Ein Tag ohne lächeln ist ein verlorener Tag( Charlie Chaplin )
------------------------------------------
Kein Support per PN..dafür ist das Forum da.