deine bootargs sind mehr als krum....
mach das mal per hyperterminal und nich mit morlys tool
deine bootargs sind mehr als krum....
mach das mal per hyperterminal und nich mit morlys tool
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Habe nochmal das gleiche Image ohne erfolg getestet und werde nun einmal ein älteres probieren.
by dontcry gibt es nun auch mehr infos output:
aber auch hier steht doch am anfang:Code:=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.02.06 09:07:38 =~=~=~=~=~=~=~=~=~=~=~= * Board: STb7200-HDBOX [29-bit mode] U-Boot 1.3.1 (Apr 28 2010 - 15:01:04) - stm23-0032 ---created by TDT for general purpose--- DRAM: 128 MB Flash: 32 MB In: serial Out: serial Err: serial Frontpanel got PowerOn reset... init Frontpanel... done, AV7000 Hit any key to stop autoboot: 1 0 bootmenu_timeout:3000,default:3 add entry:0 - ---Flash--- add entry:1 - --USB1 P1-- add entry:2 - --USB1 P2-- add entry:3 - --USB1 P3-- add entry:4 - --USB1 P4-- add entry:5 - --USB2 P1-- add entry:6 - --USB2 P2-- add entry:7 - --USB2 P3-- add entry:8 - --USB2 P4-- add entry:9 - --USB 112-- entering bootmenu - default:3 - --USB1 P3-- USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found reading /uImage3 ** Unable to read "/uImage3" from usb 0:1 ** loading from usb 0:3 1916143 bytes read ## Booting image at a5000000 ... Image Name: Linux-2.6.32.28_stm24_0207 Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 1916079 Bytes = 1.8 MB Load Address: 84001000 Entry Point: 84002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel console=ttyAS1,115200 nwhwconf=device:eth0,hwaddr:00:1E:B8:01:3C:0A ip=192.168.178.28::192.168.178.1:255.255.255.0:Twin:eth0:off root=/dev/sdb3 rw mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 init=/bin/dev - 0x00000000 - 0 ... INIT: version 2.86 booting INIT: Entering runlevel: 3 [rcS] start /etc/init.d/rcS INIT: no more processes left in this runlevel [rcS] booting AAF_M15000_r3650_at7000_enigma2 Mount /dev in tmpfs Copying device nodes to /dev [rcS] start start.sh first enigma2 at7000 [start.sh] [first] startConfig [start.sh] Thread 1 start shared mem created [start.sh] [first] init stmfb [start.sh] [first] startTimeset Sat Dec 12 20:00:00 CET 1970 [/var/etc/autostart/start.sh] start inetd [set_was_timer_wakeup] checkConfig [set_was_timer_wakeup] configs: WAKEUPDECREMENT 300 [start.sh] [first] enable HDMI [start.sh] [first] startBootlogo [start.sh] [first] startVfd [bootlogo.sh] start /var/etc/boot/bootlogo.sh [start.sh] [first] current Date : 20:00:00 12-12-1970 [bootlogo.sh] use bootlogo jpg /bin/fp_control: SW Version 1.02 Model: hdbox vBoxType: 7 Selected Model: Fortis HDBOX frontpanel control utility cannot open /dev/vfd No such device or address checkConfig configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S , WAKEUPDECREMENT 300 getTimeFromArg getTimeFromArg < Set Time (UTC): 19:00:00 12-12-1970 settime: : Bad file descriptor [start.sh] Thread 1 end *** InfoBox v1.7 by GOst4711 and nit *** 1280x720, 32bpp [start.sh] [first] startFrontpanel [start.sh] [first] init frontpanel [start.sh] [first] startEvremote enigma2 at7000 MaxRate= 10 MaxDelay= 120 [/var/etc/autostart/start.sh] start autofs Model: hdbox vBoxType: 7 Input device name: "TDT RC event driver" Selected Remote: Fortis HDBOX RemoteControl RemoteControl Map: MENU - 04 - 139 RED - 4B - 398 GREEN - 4A - 399 YELLOW - 49 - 400 BLUE - 48 - 401 EXIT - 1C - 102 TEXT - 0D - 388 EPG - 08 - 365 REWIND - 58 - 168 FASTFORWARD - 5C - 208 PLAY - 55 - 207 PAUSE - 07 - 119 RECORD - 56 - 167 STOP - 54 - 128 STANDBY - 0A - 116 MUTE - 0C - 113 CHANNELUP - 5E - 104 CHANNELDOWN - 5F - 109 VOLUMEUP - 4E - 115 VOLUMEDOWN - 4F - 114 INFO - 06 - 138 OK - 1F - 352 UP - 00 - 103 RIGHT - 02 - 106 DOWN - 01 - 108 LEFT - 03 - 105 RECALL - 09 - 396 ZOOM - 0B - 372 VFORMAT - 0E - 371 RESOLUTION - 0F - 375 TVRADIO - 1A - 373 SLEEP - 1E - 409 OPEN - 40 - 394 FAV - 41 - 364 CHECK - 42 - 353 UPUP - 43 - 414 DOWNDOWN - 44 - 415 NEXT - 4C - 407 LAST - 50 - 412 PIP - 51 - 357 SWAP - 52 - 354 LIST - 53 - 370 0BUTTON - 10 - 11 1BUTTON - 11 - 2 2BUTTON - 12 - 3 3BUTTON - 13 - 4 4BUTTON - 14 - 5 rm: can't remove '/media/net/*': No such file or directory 5BUTTON - 15 - 6 6BUTTON - 16 - 7 7BUTTON - 17 - 8 8BUTTON - 18 - 9 9BUTTON - 19 - 10 Frontpanel Map: STANDBY - 00 - 116 OK - 06 - 352 MENU - 05 - 139 VOLUMEUP - 04 - 115 VOLUMEDOWN - 03 - 114 CHANNELUP - 01 - 104 CHANNELDOWN - 02 - 109 Supports Long KeyPress: 1 processComplex > period 10, delay 120 Using period=10 delay=120 [SEM] DOWN [/var/etc/autostart/start.sh] start load autofs jpg image hight = 720 jpg image width = 1280 [/var/etc/autostart/start.sh] start hotplug.sh first enigma2 at7000 [/var/etc/autostart/start.sh] startNetwork: start [start.sh] [first] startAvs [start.sh] [first] load audio firmware (/boot/audio.elf) copLoadFile (file /boot/audio.elf) [networking] start eth0... ustslave: Kernel Version: 24 base_address 0x10400000 seeking to 0 seeking to 5f00 seeking to 12320 [networking] eth0 using static ip seeking to 1aa20 seeking to 173100 seeking to 173138 seeking to 173170 seeking to 1b9058 seeking to 1b9060 seeking to 1b9068 seeking to 1b9070 seeking to 1d0920 seeking to 1d0a00 [start.sh] [first] load video firmware copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x10000000 seeking to 0 seeking to 4e020 seeking to f8378 seeking to f83b0 seeking to f83e8 seeking to 10ce98 seeking to 10cea4 seeking to 10ceb0 seeking to 12ed90 seeking to 12cd74 seeking to 12ee00 [start.sh] [first] init embx [start.sh] [first] init player 191 [hotplug.sh] startNewdev device=sda1 label= type=jfs [hotplug.sh] startChangedev device=sda1 label=NONLABEL-sda1 type=jfs [hotplug.sh] startCheckdev device=sda1 label=NONLABEL-sda1 type=jfs ls: /media/autofs/sda1: No such file or directory [hotplug.sh] startCheckdev can not mount device=sda1 label=NONLABEL-sda1 type=jfs [hotplug.sh] startRepairdev device=sda1 [start.sh] [first] startBootlogo cont [start.sh] [first] startReader enigma2 at7000 [start.sh] Thread 2 start [start.sh] [first] startPowerLed fp_control: SW Version 1.02 Model: hdbox vBoxType: 7 Selected Model: Fortis HDBOX frontpanel control utility checkConfig configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S , WAKEUPDECREMENT 300 sh: write error: Input/output error sh: write error: Input/output error sh: write error: Input/output error sh: write error: Input/output error [start.sh] Thread 2 end ls: /media/autofs/sda1: No such file or directory killall: szap: no process killed killall: enigma2: no process killed *** InfoBox v1.7 by GOst4711 and nit *** 1280x720, 32bpp 160 - OK **** 10428 1 **** [SEM] UP KEY_PRESS - 160 1 ++++ 2 ms ++++ 160 - OK **** 52 1 **** ++++ 79 ms ++++ KEY_RELEASE - 160 00 1 1 CAUSE=Timeout ---- 132 ms ---- [SEM] DOWN ------- Programmende [/sbin/hotplug.sh] startFsck parameter1=sda1 parameter2= umount: can't umount /dev/sda1: Invalid argument /sbin/jfs_fsck version 1.1.15, 04-Mar-2011 processing started: 12/12/1970 20:00:13 The current device is: /dev/sda1 Block size in bytes: 4096 Filesystem size in blocks: 156282624 **Phase 0 - Replay Journal Log |........ .|....... ..|...... [/var/etc/autostart/start.sh] startWaitfor timed out: maxwaittime=10 sec waitfor=/tmp/.hotplugready ...|..... ....|.... .....|... ......|.. .......|. Filesystem is clean. killall: szap: no process killed killall: enigma2: no process killed add /dev/ttyUSB0 ls: /dev/ttyUSB0: No such file or directory add /dev/ttyUSB1 ls: /dev/ttyUSB1: No such file or directory [hotplug.sh] startIsreadonly device=sda1 label=NONLABEL-sda1 type=jfs [hotplug.sh] startNewdev found movie device=sda1 label=NONLABEL-sda1 type=jfs [hotplug.sh] startNewdev device=sdb1 label=MINI1 type=jfs [hotplug.sh] startChangedev device=sdb1 label=MINI1-sdb1 type=jfs [rcS] starting enigma2 [FREESAT] Init tables setenv('prefix', '/usr', 0) setenv('exec_prefix', '${prefix}', 0) setenv('bindir', '${exec_prefix}/bin', 0) setenv('sbindir', '${exec_prefix}/sbin', 0) setenv('libexecdir', '${exec_prefix}/libexec', 0) setenv('datarootdir', '${prefix}/share', 0) setenv('datadir', '/usr/local/share', 0) setenv('sysconfdir', '/etc', 0) setenv('sharedstatedir', '${prefix}/com', 0) setenv('localstatedir', '${prefix}/var', 0) setenv('libdir', '${exec_prefix}/lib', 0) setenv('localedir', '${datarootdir}/locale', 0) setenv('prefix', '/usr', 1) setenv('exec_prefix', '/usr', 1) setenv('bindir', '/usr/bin', 1) setenv('sbindir', '/usr/sbin', 1) setenv('libexecdir', '/usr/libexec', 1) setenv('datarootdir', '/usr/share', 1) setenv('datadir', '/usr/local/share', 1) setenv('sysconfdir', '/etc', 1) setenv('sharedstatedir', '/usr/com', 1) setenv('localstatedir', '/usr/var', 1) setenv('libdir', '/usr/lib', 1) setenv('localedir', '/usr/share/locale', 1) resolve: resolve ${datadir}/enigma2/encoding.conf resolve: -> /usr/local/share/enigma2/encoding.conf resolve: resolve ${libdir}/enigma2/python resolve: -> /usr/lib/enigma2/python PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (8) graphics acceleration manager STMFB accel interface available + (9) GFBDC 15360k video mem 5640kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 5120) + (9) gLCDDC couldn't open LCD - load lcd.o! lcd buffer 0x653510 8448 bytes, stride 132 + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI eDVBCI_UI > eDVBCI_UI < + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "TDT RC event driver" is not a keyboard. failed to open /dev/input/event1 Input device "" is not a keyboard. failed to open /dev/input/event2 Input device "" is not a keyboard. failed to open /dev/input/event3 Input device "" is not a keyboard. Found 4 input devices! + (21) Console RC Driver failed to open /dev/tty0 + (30) eActionMap + (35) CI Slots scanning for common interfaces.. CI Slot 0: reset requested deleteSessions > deleteSessions < CI Slot 1: reset requested deleteSessions > deleteSessions < stat on /dev/dvb/adapter0/ci2 failed CI Slot 0 setSource(0) CI Slot 1 setSource(0) eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) cannot open /proc/stb/tsmux/input2 cannot open /proc/stb/tsmux/input3 done, found 2 common interface slots + (40) eServiceCenter settings instance. + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 resolve: resolve ${sysconfdir}/enigma2/lamedb resolve: -> /etc/enigma2/lamedb ---- opening lame channel db reading services (version 4) [hotplug.sh] startNewdev device=sdb2 label=MINI2 type=ext2 [hotplug.sh] startChangedev device=sdb2 label=MINI2-sdb2 type=ext2 [hotplug.sh] startNewdev device=sdb3 label=MINI3 type=ext2 [hotplug.sh] startChangedev device=sdb3 label=MINI3-sdb3 type=ext2 loaded 2023 services scanning for frontends.. opening frontend 0 [hotplug.sh] startNewdev device=sdb4 label=SWAP type=vfat [hotplug.sh] startChangedev device=sdb4 label=SWAP-sdb4 type=vfat detected satellite frontend FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported close frontend 0 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported opening frontend 1 detected satellite frontend FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported close frontend 1 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 11 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) resolve: resolve ${datadir}/enigma2/skin_default/pal.png resolve: -> /usr/local/share/enigma2/skin_default/pal.png /dev/sda: hdparm: BLKRRPART: Device or resource busy Loading spinners... resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait1.png /dev/sdb: hdparm: BLKRRPART: Device or resource busy resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait2.png hdparm: can't open '/dev/sdc': No such device or address resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait3.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait4.png hdparm: can't open '/dev/sdd': No such device or address resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait5.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait6.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait7.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait8.png resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait8.png found 7 spinner! executing main setIoPrio best-effort level 3 ok resolve: resolve ${libdir}/enigma2/python/mytest.py resolve: -> /usr/lib/enigma2/python/mytest.py resolve: resolve ${sysconfdir}/ resolve: -> /etc/ resolve: resolve ${sysconfdir}/ resolve: -> /etc/ resolve: resolve ${datadir}/fonts/ resolve: -> /usr/local/share/fonts/ resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ resolve: resolve ${libdir}/enigma2/python/Plugins/ resolve: -> /usr/lib/enigma2/python/Plugins/ resolve: resolve ${datadir}/enigma2/po/ resolve: -> /usr/local/share/enigma2/po/ resolve: resolve ${datadir}/enigma2/ resolve: -> /usr/local/share/enigma2/ resolve: resolve ${datadir}/enigma2/ resolve: -> /usr/local/share/enigma2/ resolve: resolve ${sysconfdir}/enigma2/playlist/ resolve: -> /etc/enigma2/playlist/ resolve: resolve ${datadir}/enigma2/defaults/ resolve: -> /usr/local/share/enigma2/defaults/ resolve: resolve ${datadir}/enigma2/dealer resolve: -> /usr/local/share/enigma2/dealer resolve: resolve ${datadir}/meta resolve: -> /usr/local/share/meta resolve: resolve ${datadir}/enigma2/defaults/ resolve: -> /usr/local/share/enigma2/defaults/ couldn't open fp enumerating block devices... enumerateBlockDevices 1 blockdev loop0 found block device 'loop0': blacklisted enumerateBlockDevices 1 blockdev loop1 found block device 'loop1': blacklisted enumerateBlockDevices 1 blockdev loop2 found block device 'loop2': blacklisted enumerateBlockDevices 1 blockdev loop3 found block device 'loop3': blacklisted enumerateBlockDevices 1 blockdev loop4 found block device 'loop4': blacklisted enumerateBlockDevices 1 blockdev loop5 found block device 'loop5': blacklisted enumerateBlockDevices 1 blockdev loop6 found block device 'loop6': blacklisted enumerateBlockDevices 1 blockdev loop7 found block device 'loop7': blacklisted enumerateBlockDevices 1 blockdev mtdblock0 found block device 'mtdblock0': blacklisted enumerateBlockDevices 1 blockdev mtdblock1 found block device 'mtdblock1': blacklisted enumerateBlockDevices 1 blockdev mtdblock2 found block device 'mtdblock2': blacklisted enumerateBlockDevices 1 blockdev mtdblock3 found block device 'mtdblock3': blacklisted enumerateBlockDevices 1 blockdev mtdblock4 found block device 'mtdblock4': blacklisted enumerateBlockDevices 1 blockdev mtdblock5 found block device 'mtdblock5': blacklisted enumerateBlockDevices 1 blockdev sda found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1'] [Harddisk] found: /sys/devices/platform/sata-stm/host0/target0:0:0/0:0:0:0 new Harddisk sda -> /dev/sda -> /dev/sda [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda') enumerateBlockDevices 2 part: sda1 [Harddisk] found: sda1 found block device 'sda1': error querying properties enumerateBlockDevices 1 blockdev sdb found block device 'sdb': ok, removable=True, cdrom=False, partitions=['sdb1', 'sdb2', 'sdb3', 'sdb4'] enumerateBlockDevices 2 part: sdb1 [Harddisk] found: sdb1 found block device 'sdb1': error querying properties enumerateBlockDevices 2 part: sdb2 [Harddisk] found: sdb2 found block device 'sdb2': error querying properties enumerateBlockDevices 2 part: sdb3 [Harddisk] found: sdb3 found block device 'sdb3': error querying properties enumerateBlockDevices 2 part: sdb4 [Harddisk] found: sdb4 found block device 'sdb4': error querying properties [harddisk] AutoFS add: NETFS (smbfs) smbfs -fstype=smbfs,allow_other,nonempty :/media/smbfs [harddisk] AutoFS add: NETFS (upnpfs) upnpfs -fstype=upnpfs,allow_other,nonempty :/media/upnpfs [harddisk] AutoFS skip: ERROR (sda1) [harddisk] AutoFS skip: ERROR (sdb1) [harddisk] AutoFS skip: ERROR (sdb2) [harddisk] AutoFS skip: ERROR (sdb3) [harddisk] AutoFS skip: ERROR (sdb4) Preferred tag editor set to None [standby] boxversion at7000 Reading satellites.xml resolve: resolve ${datadir}/enigma2/unicable.xml resolve: -> /usr/local/share/enigma2/unicable.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 1 to slotid 1, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: diseqc_a_b_c_d slot: 1 configmode: equal sec config completed resolve: resolve ${datadir}/enigma2/setup.xml resolve: -> /usr/local/share/enigma2/setup.xml resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/bouquets.tv resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/userbouquet.favourites.tv 54 entries in Bouquet userbouquet.favourites.tv 1 entries in Bouquet bouquets.tv resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/bouquets.radio resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/userbouquet.dbe02.radio 13 entries in Bouquet userbouquet.dbe02.radio resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/userbouquet.favourites.radio 0 entries in Bouquet userbouquet.favourites.radio 2 entries in Bouquet bouquets.radio [eDVBLocalTimeHandler] enable sync local time with transponder time! /usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead add dreampackage scanner plugin added 4956kB available for acceleration surfaces. resolution: 1024 x 576 x 32 (stride: 5120) [FONT] adding font /usr/local/share/fonts/default.ttf...OK (Regular) [FONT] adding font /usr/local/share/fonts/Symbols.ttf...OK (Symbols) [FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' > resolve: resolve ${datadir}/enigma2/keymap.xml resolve: -> /usr/local/share/enigma2/keymap.xml [ePopen] command: ip -o addr show dev eth0 resolve: resolve ${datadir}/keymaps/ resolve: -> /usr/local/share/keymaps/ Activating keymap: Keyboard English resolve: resolve ${datadir}/keymaps/ resolve: -> /usr/local/share/keymaps/ Activating language German language set to de_DE [VFD-Icons] BOXVERSION = at7000 --> applying pep values couldn't apply pep values. getModeList for port Component getModeList for port Scart getModeList for port HDMI getModeList for port HDMI-PC hotplug on dvi -> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto(4:3_off) -> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto(4:3_off) -> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto(4:3_off) -> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto(4:3_off) setMode - port: HDMI mode: 1080p rate: 24Hz -> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto(4:3_off) updateColor: HDMI Plugins [WebInterface] set language to de [WebInterface] set language to de /usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead [WebInterface] fallback to default translation for Webinterface [eSocketMMIHandler] created successfully [PLUGLOAD] Python searchpath: ['/usr/lib/enigma2/python', '/usr/lib/python26.zip', '/usr/lib/python2.6', '/usr/lib/python2.6/plat-linux2', '/usr/lib/python2.6/lib-tk', '/usr/lib/python2.6/lib-old', '/usr/lib/python2.6/lib-dynload', '/usr/lib/python2.6/site-packages', '/var/swap/python2.6', '/var/swap/python2.6/site-packages'] It's now Sat Dec 12 20:00:50 1970 [timer.py] next activation: 29876550 (in 99719 ms) [EPGRefresh] fallback to default translation for Automated EPGRefresher [EPGRefresh] fallback to default translation for Automated EPGRefresher [EPGRefresh] fallback to default translation for Add to EPGRefresh [Aaf-Panel] boxversion: at7000 ImageType: Usb boxversion at7000 starting hotplug handler ... ... ... It's now Sat Dec 12 20:00:55 1970 [timer.py] next activation: 29876555 (in 99887 ms) Repeated: 1 Repeated: 3 Repeated: 7 Repeated: 15 Repeated: 31 Repeated: 63 Repeated: 127 ProcessRepeated localrepeatedbegindate: Sat Dec 12 04:15:00 2009 localbegin: Sat Dec 12 04:15:00 2009 localend: Sat Dec 12 04:15:00 2009 localnow: Sat Dec 12 20:00:56 1970 Day: 0 Day: 1 Day: 2 Day: 3 Day: 4 Day: 5 Day: 6 ProcessRepeated result Sat Dec 12 04:15:00 2009 Sat Dec 12 04:15:01 2009 It's now Sat Dec 12 20:00:55 1970 next real activation is Sat Dec 12 04:15:01 2009 [timer.py] next activation: 29876555 (in 99793 ms) [EPGC] setCacheFile read/write epg data from/to '/media/autofs/sdb4/epg.dat' not showing fine-tuning wizard, config variable doesn't exist showtestcard is false Looking for embedded skin warning, skin is missing element VolumeText in <class 'Screens.Volume.Volume'> setValue 45 [showMute] Setvolume: 45 45 (raw) Setvolume: 35 35 (-1db) allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! reused converter! RemovePopup, id = ZapError warning, skin is missing element VolumeText in <class 'Screens.Volume.Volume'> allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! reused converter! allocating new converter! resolve: resolve ${datadir}/enigma2/%s/ resolve: -> /usr/local/share/enigma2/%s/ reused converter! allocating new converter! playing 1:0:1:6D66:437:1:C00000:0:0:0: [VFD-Icons] __evSeekableStatusChanged [VFD-Icons] showTimeShift [VFD-Icons] Timeshift disabled [VFD-Icons] __getSeekState not pauseable. RemovePopup, id = ZapError allocate channel.. 0437:0001 opening frontend 0 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported [eDVBCAService] new channel 0x123f6d8! (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 11953500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1353 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:1:6D66:437:1:C00000:0:0:0: allocate demux resolve: resolve ${sysconfdir}/scan_tp_valid_check.py resolve: -> /etc/scan_tp_valid_check.py set sequence pos 3 set sequence pos 4 [SEC] setVoltage 2 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported [SEC] sleep 200ms child has terminated pipes closed ------- Programmende [ePopen] command: route -n | grep eth0 child has terminated pipes closed poll: unhandled POLLERR/HUP/NVAL for fd 27(16) poll: unhandled POLLERR/HUP/NVAL for fd 29(16) child has terminated pipes closed poll: unhandled POLLERR/HUP/NVAL for fd 36(16) [SEC] invalidate current switch params [SEC] sendDiseqc: e00000(DiSEqC reset) [SEC] sleep 50ms child has terminated pipes closed 192.168 0.0.0.0 nameservers: [[192, 168, 178, 1]] read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'address': [192, 168, 178, 180]}} self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 180], 'up': True, 'mac': '00:1e:b8:01:3c:0a', 'dhcp': False, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}} [] [Toplevel.importExternalModules] Imported external module: Example [Toplevel.importExternalModules] Could NOT import external module: EPGRefresh [Toplevel.importExternalModules] Exception Caught Bad magic number in /usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh/EPGRefreshResource.pyc [Toplevel.importExternalModules] Could NOT import external module: AutoTimer [Toplevel.importExternalModules] Exception Caught Bad magic number in /usr/lib/enigma2/python/Plugins/Extensions/AutoTimer/AutoTimerResource.pyc [Webinterface] started on 192.168.178.180:80 auth= False ssl= False [WebInterface.registerBonjourService] No module named Bonjour.Bonjour [Webinterface] started on 127.0.0.1:80 auth= False ssl= False [WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour poll: unhandled POLLERR/HUP/NVAL for fd 34(16) [SEC] sendDiseqc: e00003(DiSEqC peripherial power on) [SEC] sleep 150ms [SEC] sendDiseqc: e01038f3 [SEC] sleep 50ms set sequence pos 3 [SEC] setTone 1 [SEC] sleep 10ms [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 [SEC] sleep 500ms (0)fe event: status 0, inversion off, m_tuning 1 (0)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok [eDVBCAService] channel 0x123f6d8 running [eDVBLocalTimerHandler] channel 0x123f6d8 running no version filtering 0014: 70 00 00 00 00 00 mask: fc 00 00 00 00 00 mode: 00 00 00 00 00 00 [eEPGCache] channel 0x123f6d8 running stop release channel timer no version filtering 0012: 4e 6d 66 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 ok ... now we start!! no version filtering 0000: 00 00 00 00 00 00 mask: ff 00 00 00 00 00 mode: 00 00 00 00 00 00 eventNewProgramInfo 0 0 have 1 video stream(s) (006e), and 1 audio stream(s) (0078), and the pcr pid is 006e, and the text pid is 0082 allocate demux disable teletext subtitles decoder state: play, vpid=110, apid=120 DMX_SET_PES_FILTER(0x6e) - pcr - ok DMX_SET_PES_FILTER(0x78) - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 0 - ok DMX_SET_PES_FILTER(0x6e) - video - ok VIDEO_PLAY - ok DMX_SET_PES_FILTER(0x82) - ttx - ok VIDEO_CONTINUE - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok AUDIO_CONTINUE - ok AUDIO_CHANNEL_SELECT(0) - ok [VFD-Icons] __evUpdatedInfo MPEG [VFD-Icons] noRecords [VFD-Icons] showCrypted [VFD-Icons] showDolby [VFD-Icons] showMp3 [VFD-Icons] showMute [VFD-Icons] showTimer [VFD-Icons] seekTimers Search Timers [seekTimers] State = 0 [VFD-Icons] seekTimers Found timer [VFD-Icons] showTuner [VFD-Icons] showTuner TUNER 1 [Volume Adjust] Update Info [Setvolume] start with volume 45 Setvolume: 45 45 (raw) Setvolume: 35 35 (-1db) [Volume Adjust] Volume = 45 [Volume Adjust] load xml... [Volume Adjust] New Channel [Volume Adjust] oldvol = 0 PlugLoad is loading Plugins + 1/1 TID 00 done! PATready use pmtpid 0064 for service_id 6d66 no version filtering 0064: 02 6d 66 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 doing version filtering 0000: 00 00 00 01 00 00 mask: ff 00 00 3f 00 00 mode: 00 00 00 3e 00 00 VIDEO_GET_EVENT - ok unhandled DVBAPI Video Event 9 + 1/1 TID 02 done! eventNewProgramInfo 0 0 have 1 video stream(s) (006e), and 4 audio stream(s) (0078, 0079, 007a, 007d), and the pcr pid is 006e, and the text pid is 0082 decoder state: play, vpid=110, apid=120 [VFD-Icons] __evUpdatedInfo MPEG MPEG MPEG AC3 [VFD-Icons] noRecords [VFD-Icons] showCrypted [VFD-Icons] showDolby [VFD-Icons] showMp3 [VFD-Icons] showMute [VFD-Icons] showTimer [VFD-Icons] seekTimers Search Timers [seekTimers] State = 0 [VFD-Icons] seekTimers Found timer [VFD-Icons] showTuner [VFD-Icons] showTuner TUNER 1 [Volume Adjust] Update Info [Volume Adjust] Volume = 45 [Volume Adjust] load xml... [eDVBCAService] new service 1:0:1:6D66:437:1:C00000:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:1:6D66:437:1:C00000:0:0:0: [eDVBCIInterfaces] gotPMT demux 0 mask 01 prevhash 00000000 doing version filtering 0064: 02 6d 66 01 00 00 mask: ff ff ff 3f 00 00 mode: 00 00 00 3e 00 00 [eDVBLocalTimerHandler] dont have correction.. set Transponder Diff [eDVBLocalTimerHandler] update RTC [eDVBLocalTimerHandler] time update to 09:09:16 [eDVBLocalTimerHandler] m_time_difference is 1393333696 [eDVBLocalTimerHandler] set Linux Time [EPGC] time updated.. start EPG Mainloop before: 1 after: 1 [EPGC] No blacklist found -+ 1/2 TID 4e VIDEO_GET_EVENT - ok unhandled DVBAPI Video Event 5 FE_GET_PROPERTY failed (Invalid argument) sdt update done! Plugins ++ 2/2 TID 4e done! [VFD-Icons] __evUpdatedEventInfo doing version filtering 0012: 4e 6d 66 19 00 00 mask: ff ff ff 3f 00 00 mode: 00 00 00 3e 00 00 VIDEO_GET_EVENT - ok [WebInterface] fallback to default translation for Webinterface [VFD-Icons] __evVideoSizeChanged VIDEO_GET_EVENT - ok [MediaCenter] LANGUAGE: de [MediaCenter] LANGUAGE: de rm: can't remove '/tmp/.imdbrunning': No such file or directory [VirtualZap] fallback to default translation for Virtual (PiP) Zap [EPGRefresh] fallback to default translation for Automated EPGRefresher [EPGRefresh] fallback to default translation for Automated EPGRefresher [EPGRefresh] fallback to default translation for Add to EPGRefresh [CI_Assignment] activating ci configs: [CI_Activate] FOUND 2 CI Slots resolve: resolve ${sysconfdir}/enigma2/ci resolve: -> /etc/enigma2/ci [CI_Activate_Config_CI0] no config file found [CI_Activate_Config_CI0] error parsing xml... resolve: resolve ${sysconfdir}/enigma2/ci resolve: -> /etc/enigma2/ci [CI_Activate_Config_CI1] no config file found [CI_Activate_Config_CI1] error parsing xml... [Webinterface] stopping interface on 192.168.178.180 with port 80 [Webinterface] stopping interface on 127.0.0.1 with port 80 [ePopen] command: /var/etc/autostart/start.sh last & [Webinterface] started on 192.168.178.180:80 auth= False ssl= False [WebInterface.registerBonjourService] No module named Bonjour.Bonjour [Webinterface] started on 127.0.0.1:80 auth= False ssl= False HOTPLUG connection! hotplug: ACTION=add complete ACTION=add HOTPLUG connection lost! hotplug: {'ACTION': 'add', 'X_E2_CDROM': '0', 'X_E2_REMOVABLE': '0', 'DEVPATH': '/devices/virtual/block/ramzswap0'} found block device 'ramzswap0': blacklisted [EPGC] 60766 events read from /media/autofs/sdb4/epg.dat [EPGC] start cleanloop [EPGC] stop cleanloop [EPGC] 4269640 bytes for cache used [EPGC] next update in 2 sec [EPGC] start caching events(1423210172) no ancillary data in audio stream... abort radiotext pes parser [set_was_timer_wakeup] Current Time: 09:09:26 06-02-2015 [set_was_timer_wakeup] Wakup Time: 21:30:00 06-02-2015 [set_was_timer_wakeup] diff in sec=44434, maxdiff=300 [EPGC] abort non avail schedule other reading [EPGC] abort non avail FreeSat schedule_other reading [EPGC] abort non avail viasat reading [EPGC] abort non avail mhw reading child has terminated pipes closed poll: unhandled POLLERR/HUP/NVAL for fd 56(16) [EPGC] nownext finished(1423210185)
Starting kernel ... root=/dev/sdb3 ...
also sdb und dennoch läuft es
- - - Aktualisiert - - -
HDMU_13068 mit dem gleichen Ergebnis, hängt mit dem selben Output wie die aktuelle HDMU Version.
und einen Unterschied zwischen beiden Versionen gibt es auch beim HDMU, wenn auch nicht im log.
Sobald es hängt steht im Display
ohne eSata Platte : "Booting .."
Mit eSata Platte : "T.-Ducktales"
- - - Aktualisiert - - -
jetzt sieht das hier im Hyperterminal wie folgt aus:
Kommt mir inzwischen bekannt vor, aber wat nu?Code:HDBOX> printenvbootdelay=1 baudrate=115200 autoload=n board=Twin ethaddr=00:1E:B8:01:3C:0A ipaddr=192.168.178.28 netmask=255.255.255.0 gatewayip=192.168.178.1 hdd=1 init mtdargs=set bootargs console=ttyAS1,115200 nwhwconf=device:eth0,hwaddr:${ethaddr} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask} root=/dev/mtdblock3 rootfstype=squashfs bigphysarea=4060 stmmaceth=msglvl:0,watchdog:4000,rxsize:16 loglevel=0 usbargs=set bootargs console=ttyAS1,115200 nwhwconf=device:eth0,hwaddr:${ethaddr} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${board}:eth0:off root=/dev/sd${sdx}${par} rw mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 init=/bin/dev sdxconf=if test $hdd -eq 0 -a $usb -eq 0; then set sdx a; elif test $hdd -eq 1 -a $usb -eq 1; then set sdx c; else set sdx b; fi usbconf=usb reset; sleep 3; run sdxconf; run usbargs usbload=if fatload usb $usb:1 a5000000 /uImage$par; then; elif ext2load usb $usb:$par a5000000 /boot/uImage; then; fi backup=erase a0300000 a1ffffff; cp.b a5000000 a0300000 1d00000; run mtdargs; bootm a0300000 usbtool=if fatload usb 0:1 a5000000 /uImage; then bootm a5000000; elif fatload usb 0:1 a5000000 /uBackup_${board}; then run backup; fi; run mtdargs; bootm a0300000 bootcmd=bootmenu $menutimeout $default bootdesc_0=---Flash--- bootcmd_0=run mtdargs; bootm a0300000 bootdesc_1=--USB1 P1-- bootcmd_1=set usb 0; set par 1; run usbconf; run usbload; bootm a5000000 bootdesc_2=--USB1 P2-- bootcmd_2=set usb 0; set par 2; run usbconf; run usbload; bootm a5000000 bootdesc_3=--USB1 P3-- bootcmd_3=set usb 0; set par 3; run usbconf; run usbload; bootm a5000000 bootdesc_4=--USB1 P4-- bootcmd_4=set usb 0; set par 4; run usbconf; run usbload; bootm a5000000 bootdesc_5=--USB2 P1-- bootcmd_5=set usb 1; set par 1; run usbconf; run usbload; bootm a5000000 bootdesc_6=--USB2 P2-- bootcmd_6=set usb 1; set par 2; run usbconf; run usbload; bootm a5000000 bootdesc_7=--USB2 P3-- bootcmd_7=set usb 1; set par 3; run usbconf; run usbload; bootm a5000000 bootdesc_8=--USB2 P4-- bootcmd_8=set usb 1; set par 4; run usbconf; run usbload; bootm a5000000 bootdesc_9=--USB 112-- bootcmd_9=set usb 0; set par 2; run usbconf; run usbtool menutimeout=3000 default=3 stdin=serial stdout=serial stderr=serial Environment size: 2227/65532 bytes
BTW: Mal danke für den tollen und schnellen Support hier.
warum mußt du die platte separat ab und anschalten?
da in den bootargs hdd=1 gestzt ist wird immer davon ausgegangen daß eine sata platte vorhanden ist und nur dann ist die effektive kernel commandline richtig.
wenn die platte ausgeschaltet ist, dann stimmt die kernelcommandline nicht weil da dann immer noch root=/dev/sdb2 drinsteht obwohl das ohne platte eben sda2 sein muß (fürdeinen Fall image auf partition 2 des sticks)
Die Platte ist immer an. Ist zwar extern und hat einen Schalter, war nur zum Testen aus. Grundsätzlich ist die Platte zum Speichern von Aufnahmen immer an.