Hi @bonkel
Test:HDMU_13981_AzboxHD_OE_1982 on AZBox Ultra HD ...
access HTTP WebIf ok ... but Telnet/FTP session doesn't work (not enter) !!!
Test of net ... all ok
Ciao ...
Hi @bonkel
Test:HDMU_13981_AzboxHD_OE_1982 on AZBox Ultra HD ...
access HTTP WebIf ok ... but Telnet/FTP session doesn't work (not enter) !!!
Test of net ... all ok
Ciao ...
Sorry ...
But also with second build of today ... issue not solved !!!
Ciao ...
After the update of the day 08/04, I'm not getting connect via FTP and telnet.
test next image, i enabled ipv6 support, and by default, it is not in kernel (in all azbox)
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
.:: WARNING ::.
Test with last: HDMU_13992_AzboxHD_OE_1984_Flash ... Kernel Check CRC failed
Morly's STB Admin Tool 2.4.2.jpg
Fortunately that @morly had added check CRC and backup process of old kernel !!!
Test repeated twice !!! ... Warned ...
Geändert von arci (12.04.2015 um 13:22 Uhr)
mir wurde in einem anderen forum berichtet das Das image von heute fehlerhaft ist und dass wenn man das image installiert bleibt die box in booting
Könnte man das image entfernen damit nicht weitere Probleme gibt
Hi @morly & @bonkel
I think that the problem of the new kernel is due to its greater size than previous ... if it exceeds the area of the partition already initialized to 00h (FFh the rest) ...
I believe that you can not immediatly use the [dd] command for write it ... but you should first initialize (erase) the effective area that will occupy the kernel image !!!
In fact, using the YAMON (pflash write) console to write on the partition /dev/mtdblock4 is need to specify the length of the image file !!!
Unfortunately, for kernel write step you can not handle with the original (Sigma) binary module "update" to AZB (that could to add at Box Tools) ... because at the end of writing procedure it automatically restarts the box ... and of course you can not do a check CRC before !
Unless you have the source code, modify routine (cut off reboot) and recompile it on new linux system environment !!!
Ciao ...
Geändert von arci (13.04.2015 um 15:57 Uhr)
thx arci, will check it!!!
"Every Setback is a Set Up for a Comeback"
Hi @morly
I read the message ... and not forgotten!
When I find a bit of time ... we will clarify and also tackle the other features !
Ciao ...