wird es mit Admin Tool et9x00 funktionieren ?
wird es mit Admin Tool et9x00 funktionieren ?
Hallo Morly
mit MAT kann man nicht mehr GBueplus flashen, da sich der Speicher Bereich geändert hat vor ca. halben jahr.
Wäre schön wenn du das mal anpassen könntest.
Code:root@gb800ueplus:~# cat /proc/stb/info/model gb800ueplus root@gb800ueplus:~# uname -a Linux gb800ueplus 3.14.2 #1 Tue Oct 14 06:35:27 CEST 2014 mips GNU/Linux root@gb800ueplus:~# cat /proc/mtd dev: size erasesize name mtd0: 06e00000 00020000 "rootfs" mtd1: 06e00000 00020000 "rootfs(redundant)" mtd2: 00700000 00020000 "kernel" mtd3: 00100000 00020000 "mac" root@gb800ueplus:~#
Hallo,
zwar keine Box die bis dato Euer Image unterstüzt, aber was nicht ist kann ja noch werden.
Aber wäre geil wenn die Box eingepflegt wird.
Infos:
cat /proc/stb/info/model:
adb_box
uname -a:
Linux Adb_Box 2.6.32.59_stm24_0211 #1 PREEMPT Sat 29 12:06:42 CEST 2012 sh4 GNU/Linux
cat /proc/mtd:
dev: size erasesize name
mtd0: 00030000 00010000 "U-Boot firmware 192kB"
mtd1: 00010000 00010000 "U-Boot env 64kB"
mtd2: 00300000 00004000 "NAND1 uImage 3MB"
mtd3: 03d00000 00004000 "NAND1 RootFS 61MB"
Meine Box wird vom Tool zu 75% unterstüzt, ich suche ein Prog womit ich beide uBoots bearbeiten bzw updaten kann.
Vielen Dank.
Hallo Morly.
Kannst Du die Box auch ins MAT mit aufnehmen?
__________________________________________________ ___________________________________Code:sf3038 login: root Last login: Sun Apr 10 10:14:36 CEST 2016 on pts/1 root@sf3038:~# cat /proc/stb/info/model dm800se root@sf3038:~# uname -a Linux sf3038 4.1.15 #1 SMP Sun Mar 27 13:25:32 CEST 2016 mips GNU/Linux root@sf3038:~# cat /proc/mtd dev: size erasesize name mtd0: 20000000 00020000 "complete" mtd1: 00600000 00020000 "kernel" mtd2: 1fa00000 00020000 "rootfs" mtd3: 00400000 00010000 "spi0.0" root@sf3038:~#
Es handelt sich um den Octagon SF3038.
Geändert von sirtobie (10.04.2016 um 10:24 Uhr)