Audioniek git Tvheadend

[Saentist]

On my box there is a tool for this, TGZ-USB-Installer by Eisha
Automatically format USB drive extract TGZ image for usb and set boot arguments

is there a way for extra option for kernel logging in make.sh for testers

Boot arguments to boot from USB drive for ST7105 and ST7111.

USE ON OWN RISK

ST7105

bootdelay=0baudrate=115200
board=ST7105
targetname=muso
stdin=serial
stdout=serial
stderr=serial


gateway=192.168.2.1
ipaddr=192.168.2.8
serverip=192.168.2.2
netmask=255.255.255.0


#HDD


nwconf=setenv nwhw nwhwconf=device:eth0,hwaddr:$ethaddr; setenv nwip ip=$ipaddr:$serverip:$gateway:$netmask:$board:eth0:off
sdconf=if test $hdd -eq 0; then set par a; else set par b; fi; 


cramfsbootargs=setenv bootargs console=ttyAS0,115200 $nwhw $nwip root=/dev/mtdblock3 rootfstype=squashfs bigphysarea=5000 stmmaceth=msglvl:0,watchdog:4000,rxsize:16 $MTD loglevel=0
usbbootargs=setenv bootargs console=ttyAS0,115200 $nwhw $nwip root=/dev/sd${par}2 rw rootdelay=5 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000


mtdboot=vfd "Boot Flash"; usb stop; run cramfsbootargs; bootm 0xa0060000
usbboot=if fatload usb 0:1 84000000 uImage; then vfd "Boot USB"; run usbbootargs; bootm 84000000; fi
bootcmd=run nwconf; run sdconf; vfd "Check USB"; usb reset; run usbboot; run mtdboot


updt_boot=vfd READ;tftp 0x80000000 u-boot.bin;protect off 1:0-1;erase 1:0-1;cp.b 0x80000000 0xa0000000 $filesize;protect on 1:0-1;vfd COMPLETE
updt_boot_all=vfd READ;tftp 0x80000000 u-boot.bin;protect off 1:0-511;erase 1:0-511;cp.b 80000000 0xa0000000 $filesize;protect on 1:0-511;vfd COMPLETE
erase_config=protect off 1:264-271;erase 1:264-271;protect on 1:264-271
erase_env=protect off 1:2-2;erase 1:2-2;protect on 1:2-2

ST7111

bootdelay=0baudrate=115200
board=ST7111
targetname=muso
stdin=serial
stdout=serial
stderr=serial


gateway=192.168.2.1
ipaddr=192.168.2.8
serverip=192.168.2.2
netmask=255.255.255.0


#HDD


nwconf=setenv nwhw nwhwconf=device:eth0,hwaddr:$ethaddr; setenv nwip ip=$ipaddr:$serverip:$gateway:$netmask:$board:eth0:off
sdconf=if test $hdd -eq 0; then set par a; else set par b; fi; 


cramfsbootargs=setenv bootargs console=ttyAS0,115200 root=/dev/mtdblock3 rootfstype=squashfs $nwhw $nwip bigphysarea=5000 stb7111:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:4000,rxsize:16 $MTD loglevel=6
usbbootargs=setenv bootargs console=ttyAS0,115200 $nwhw $nwip root=/dev/sd${par}2 rw rootdelay=5 init=/bin/devinit bigphysarea=6000 stb7111:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:4000,rxsize:16 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=0


mtdboot=vfd "MTD"; usb stop; run cramfsbootargs; bootm 0xa0060000
usbboot=if fatload usb 0:1 84000000 uImage; then vfd "USB"; run usbbootargs; bootm 84000000; fi
bootcmd=run nwconf; run sdconf; vfd "AUTO"; usb reset; run usbboot; run mtdboot


updt_boot=vfd LD;tftp 0x80000000 u-boot.bin;protect off 1:0-1;erase 1:0-1;cp.b 0x80000000 0xa0000000 $filesize;protect on 1:0-1;vfd _End
updt_boot_all=vfd LD;tftp 0x80000000 u-boot.bin;protect off 1:0-255;erase 1:0-255;cp.b 80000000 0xa0000000 $filesize;protect on 1:0-255;vfd _End
updt_appb=vfd LD;tftp 0x80000000 app.img;protect off 1:64-103;erase 1:64-103;cp.b 80000000 0xa0800000 $filesize;protect on 1:64-103;vfd _End
updt_user=vfd LD;tftp 0x80000000 user.img;protect off 1:224-255;erase 1:224-255;cp.b 80000000 0xa1c00000 $filesize;protect on 1:224-255;vfd _End
erase_config=protect off 1:216-223;erase 1:216-223;protect on 1:216-223
erase_env=protect off 1:2-2;erase 1:2-2;protect on 1:2-2